|
|
Raymarine EV200 Sail Evolution Autopilot T70155
Evolution Autopilot
Includes:
- EV-1 Sensor Core
- p70s Autopilot Control Head
- ACU-200 Actuator Control Unit (Includes the
M81105 Rotary Rudder Reference)
- Evolution Cabling Kit
- EV Unit O-Ring Pack (set of 2)
- Wall Mounting Bracket
No calibration required!
Engineered for simplicity, Evolution autopilots eliminate the need for
complicated set up and calibration. Once Evolution is installed, getting started
is as easy as switching the autopilot on.
Thanks to the intelligent EV sensor core,
the autopilot automatically evolves and adapts to your vessel’s steering
characteristics without any user adjustments.
Evolution AI™
The culmination of Raymarine’s 30 years of autopilot expertise, FLIR
Systems research and development, and advanced aerospace guidance
technology, Evolution AI™ control algorithms deliver a new level of accurate
autopilot control.
This innovative breakthrough in autopilot intelligence enables Evolution
autopilots to perceive their environment and then instantly calculate and
evolve steering commands to maximise performance. The result is precise and
confident course keeping, regardless of vessel speed or sea conditions.
|
The EV Sensor Core
At the centre of every Evolution system is the intelligent EV sensor core, a
9-axis sensor that monitors vessel motion in all three dimensions. The
innovative EV sensor core combines advanced solid-state sensors with the
Evolution autopilot processor into a single easy-to-install housing.
Mount the EV sensor core above or below decks, the rugged enclosure is fully
sealed and built to IPX6 and IPX7 waterproofing and submersion standards.
EV Sensor Core Benefits
- Precision monitoring of heading, pitch, roll, and yaw allowing the
autopilot to evolve instantly as sea conditions and vessel dynamics change.
- Flexible installation options. Mount above or below deck.
- Simple SeaTalkng connectivity to the
control head and ACU.
- Solid state sensor technology delivers dynamic accuracy to within 2
degrees in all conditions.
- Auto-compensation for on board magnetic fields and reliable heading
accuracy in the northern and southern extremes.
- Fast and reliable heading data for MARPA, radar overlay, and heading modes
on Raymarine multifunction displays.
Autopilot Control Unit (ACU)
The rugged ACU (Actuator Control Unit) delivers reliable autopilot drive
power and also provides power to the SeaTalk
ng
bus. Choose the ACU that fits your steering system type:
|
Supported Drives
|
ACU-200
|
Type 1 Raymarine hydraulic, linear and rotary mechanical
drives
|
ACU-300
|
For solenoid controlled steering systems and Raymarine
constant running hydraulic pumps
|
ACU-400
|
Type 2 and 3 Raymarine hydraulic, linear, and rotary
mechanical drives
|
Your Evolution Autopilot System
EV-1 Systems with Raymarine Drives
The EV-1 is designed for Evolution mechanical and
hydraulic autopilot systems. SeaTalkng networking enables a single cable
connection for power and data to the Evolution ACU (actuator control unit)
and extended SeaTalkng and NMEA2000 networks.
|
|
EV-2 for Steer-By-Wire Propulsion
Designed for the latest drive-by-wire steering system, the
EV-2 connects directly to Raymarine’s SeaTalk
ng
bus and also features a dedicated CAN Bus port for direct connection to
steer-by-wire steering systems like ZF Pod Drives, Volvo IPS* and Teleflex
Optimus systems. The single CAN Bus connection to the EV-2 eliminates the
need for an ACU, further simplifying installation.
|
p70 and p70R Autopilot Control Heads
Complete your Evolution autopilot system with a p70 or p70R autopilot
control. The p70 and p70R control heads feature vibrant colour displays and are
powered by Raymarine’s intuitive LightHouse user interface.
LightHouse organises all options into simple menu structures and with
Evolution’s quick setup process you will be up and running in minutes.
Designed for sailing yachts, the p70 offers simple 1 and 10 degree direct course
change push buttons.
The p70R features a rotary dial control for power boaters. Use the rotary
dial for menu and course changes or activate power steer mode and steer manually
right from the p70R.
Raymarine Evolution - EV-1 and EV-2 Specifications
|
|
Models
|
E70096: EV-1
|
|
E70097: EV-2
(designed for the latest drive-by-wire steering systems)
|
|
Nominal supply voltage
|
12 V (powered by SeaTalk
ng
system)
|
Operating voltage range
|
10.8 V to 15.6 V dc
|
Power consumption
(taken from SeaTalk
ng system)
|
30 mA
|
SeaTalkng
LEN
(Load Equivalency Number)
|
1
|
Sensors
|
3-axis digital accelerometer
3-axis digital compass
3-axis gyro digital angular rate sensor
|
Data connections
|
SeaTalk
ng
NMEA 2000 DeviceNet (EV-2 only)
|
Installation environmental
|
Operating temperature: -20ºC to +55ºC (-4ºF to +131ºF)
Storage temperature: -30ºC to +70ºC (-22ºF to +158ºF)
Relative humidity: max 93%
Waterprrof rating: IPX 6
|
Dimensions
|
Diameter: 140 mm (5.5 in)
Depth (including mounting enclosure): 35 mm (1.4 in)
Depth (including wall bracket): 95 mm (3.8 in)
|
Weight
|
0.29 kg (0.64 lbs)
|
EMC compliance
|
Europe: 2004/108/EC
Australia and New Zealand
|
Raymarine Evolution ACU Specifications
|
|
|
|
|
Model
|
ACU-100
|
ACU-200
|
ACU-300
|
ACU-400
|
|
E70098
|
E70099
|
E70139
|
E70100
|
|
Drive Current Output
|
Maximum continuous
7 A at supply voltage
|
Maximum continuous 15 A at supply voltage
|
Maximum continuous 5 A
at supply voltage
|
Maximum continuous
30 A at supply voltage
|
Drive Clutch Output
|
No clutch connection
|
Up to 2.0 A continuous, selectable between 12 /24 V
|
No clutch connection
|
-
Up to 4 A continuous at 12 V on 12 V systems,
-
Up to 4 A continuous at 24 V on 24 V systems,
-
Up to 4 A continuous at 12 V on 24 V systems
|
Connections
|
-
Rudder reference sensor
-
Power
-
Drive motor
-
Ground
|
-
Rudder reference sensor
-
Sleep switch
-
Power
-
Drive motor
-
Drive clutch
-
Ground
|
|
|
Nominal supply voltage
|
12 V
|
12 V or 24 V
|
Operating voltage range
|
10.8 V to 15.6 V dc
|
10.8 V to 31.2 V dc
|
Power consumption
(standby) - main power supply
|
300 mA (12V)
|
300 mA (12/24 V)
|
Power consumption
(standby) - SeaTalk
ng power supply
|
No power supply to SeaTalk
ng
|
20 mA (12V)
|
SeaTalkng
LEN
(Load Equivalency Number)
|
1
|
SeaTalkng
Power out
|
No power supply to SeaTalk
ng
|
3 A at 12 V (fuse protected at 3 A)
|
Data connections
|
SeaTalk
ng
|
Installation environment
|
Operating temperature: -20ºC to +55ºC (-4ºF to +131ºF)
Storage temperature: -30ºC to +70ºC (-22ºF to +158ºF)
Relative humidity: max 93%
|
Waterproof rating
|
Connector panel: IPX2
Drive electronics: IPX6
|
Drip resistant
|
Dimensions
(W x H x D)
|
180 mm x 140 mm x
52 mm
(7.1 in x 5.5 in x 2.0 in)
|
285 mm x 211.5 mm x 64.5 mm
(11.2 in x 8.3 in x 2.5 in)
|
Weight
|
0.6 kg (1.32 lbs)
|
2.2kg (4.84 lbs)
|
Conformance
|
Europe: 2004/108/EC
Australia and New Zealand: C-Tick, Compliance Level 2
|
Product Document:
|
**The price is subject to change at anytime without any notice. We
are not responsible for any typographical errors. Any products can be
cancelled from sale at any time.
** All Products sold here are Brand New unless specified
Otherwise and come with Full Manufacturer's Warranty
WARNING:
This product can expose you to chemicals including Di-n-hexyl Phthalate (DnHP)
which is known to the State of California to cause reproductive harm, and
Vinyl Chloride which is known to the State of California to cause cancer. For
more information go to P65Warnings.ca.gov.
__________________________________________________________________________________________
__________________________________________________________________________________________
Please contact us via email
ask@wmjmarine.com or Call us at
__________________________________________________________________________________________
Customer Rating
Top Rated |
We
offer online shipment tracking
|
|
256-bit Encryption Shopping Cart
All personal information
submitted is encrypted and 100% secure |
__________________________________________________________________________________________
__________________________________________________________________________________________
Recommended Site:
WMJ Marine at Facebook |
WMJ Marine at
Linkedin | WMJ Marine at
Twitter |
Marine Electronics Store
Thank you for visiting WMJ marine for your
Boating Equipment and
Marine Electronics |
|
|
|
| |