Fusion SG-DA8200 Signature Series 8 Channel Marine
Amplifier
Model: 010-02162-00
- Class-D Amplifier Technology
- 2000 Watts Peak Power
- Marine-Ready Design with
Conformal Coated PCBs
- Rigid Aluminum Alloy Heat
Sink
- Stainless Mirror Finish
- Speaker Configuration
- Zone Designation
- True-Marine Design
Introducing an impressive new addition to Fusion’s Signature Series marine
amplifier range: the SG-DA82000.
Fusion Signature Series amplifiers are purpose-built for the marine environment.
Boasting some of the most impressive environmental protection available, they
deliver a Signature performance on the water like never before.
Our most efficient, stunning and powerful marine amplifier, the SG-DA82000 also
features a True-Marine design that will resist corrosion. Its incredible 2000
Watt peak power will power up to 8 pairs of speakers at 2 Ohms (2 x 4 Ohm
speakers per channel in parallel) or up to 4 pairs of speakers at 2 Ohms (2 x 4
Ohm speakers per channel in parallel) and 2 subwoofers. RCA line-level inputs
allow for easy connection to new or existing systems.
The SG-DA82000 is Fusion's first 8 channel, Class-D Hi-Fi marine amplifier. The
key benefit of a Class-D amplifier is that it has a low battery drain with high
output, making this the perfect amplifier for the marine environment. The
SG-DA82000 also has conformal coated PCBs for maximum product life and
performance, plus the amplifier chassis is a heat sink, to reduce component core
temperature and increase efficiency.
Undeniably a stand-out piece, the stunning stainless steel mirror control panel
cover conceals and protects all cable connections and setting controls, with an
attractive finish to complement any installation.
This product is rated True-Marine and carries a 3-year limited consumer
warranty.
Specifications
| Frequency
Response |
10 Hz to 40
kHz (-3 dB @ 4 Ohm rated power) |
| Peak Power
Output |
2000 W |
| Rated Power
Output (4 Ohm) |
100 W rms x
8 @ 14.4 V input < 1% THD+N (EIA/CEA-490A) |
| Rated Power
Output (2 Ohm) |
140 W rms x
8 @ 14.4 V input < 1% THD+N (EIA/CEA-490A) |
| Rated Power
Output (4 Ohm Bridged) |
280 W rms x
4 @ 14.4 V input < 1% THD+N (EIA/CEA-490A) |
| Input
Sensitivity |
0.3 V to 8
V rms, user adjustable |
| Input
Impedance |
7k Ohm
nominal |
|
High-Pass/Low-Pass Full Range Filter |
Yes, user
selectable |
| Filter
Cross-Over Frequency |
32 Hz to
320 Hz, user adjustable |
| Filter
Cross-Over Slope |
12
db/octave |
| Bass-Boost |
0 to 9 dB,
user adjustable (zone 2/4 only) |
| Operating
Voltage |
10.8 V to
16 V dc |
| Remote
Switch-On |
Yes - 6 V
threshold |
| Current
Consumption (Standby) |
< 1 mA @
14.4 V input |
| Current
Consumption (Idle) |
< 2.5 A @
14.4 V input |
| Current
Consumption (Max) |
100 A @
14.4 V input |
| Fuse Rating |
4 x 40 A
ATC Blade-Type (SAE J1171 Compliant) |
| Protection
Circuits |
Reverse-Voltage, Input Under/Over Voltage, Over-Temperature, Output
Short-Circuit |
| Operating
Temperature Range |
0 to 50°C
(32 to 122°F) |
| Ingress
Protection Rating |
Dry area
installation only |
| Dry area
installation only |
420 mm (L)
x 210 mm (W) x 57 mm (H) or 16-9/16" (L) x 8-1/4" (W) x 2-1/4" (H) |
| Warranty |
3 years |
What's in the Box:
- DA-82000 Amplifier
- Four 8-gauge, self-tapping
screws
- 3 mm hex key (for the top
cover and power terminals)
- 2.5 mm hex key (for the
speaker terminals)
- Polishing cloth
- Spare J1171 compliant 40 A
blade-type fuses
WARNING:
This product can expose you to chemicals including Di-n-hexyl Phthalate (DnHP)
which is known to the State of California to cause reproductive harm, and
Vinyl Chloride which is known to the State of California to cause cancer. For
more information go to 
