Comnav G2 GNSS Satellite Compass with 6m Cable, NMEA2000
• New:
Supports both GPS and
GLONASS
satellites for complete
redundancy
• New:
Heading accuracy < 0.25°
rms
• New:
Position accuracy < 0.3m
95% confidence (DGPS)
• New:
An integrated 9 Axis
Inertial Measurement Core (IMC technology)
provides enhanced roll, tilt and heading stability even during
momentary
loss of satellite signals
• New:
IMO Compliant G3 color
display system (optional)
• New:
Engineered enhancements to
exceed sealed IP67 rating
• New:
Extended 2 year warranty
• NMEA
0183 and NMEA 2000® interface
• Type
approved as primary heading AND positioning device
•
Heave, Pitch, Roll and Rate of Turn as standard output
•
Heading updates 1 to 20 Hz
• BAUD
Rate selectable: 4800, 9600, 19200, 38400,115200
•
Fully compatible with on board NMEA 0183 and NMEA 2000® RADAR,
ECDIS, AIS, Cameras, SONAR, PC and Autopilots
•
Compact integrated surface mounting (Pole mount optional)
• IMO
Compliant, Wheelmark and USCG approved
•
Pre-programmed default settings for Heading, Rate of Turn,
Course over Ground, Lat/Long position, Time & Date
• 1PPS
output standard
• 15
meter serial cable standard (30 meter optional)
• 6
meter NMEA 2000® Cable (Optional)
• CE
certified for EMI and RFI immunity
• Worldwide service
SPECIFICATIONS
Receiver Type:
L1, C/A code, with carrier phase
smoothing
Channels:
Two x 32 parallel tracking GPS,
GLONASS, SBAS
Update Rate:
Standard 10 Hz, Selectable up to
20 Hz
(position and heading)
Horizontal Accuracy:
< 0.3 m 95% confidence (DGPS)*
< 2.5 m 95% confidence (autonomous, no SA)**
Heading Accuracy:
< 0.25º rms
Pitch / Roll Accuracy:
< 1º rms
Heave Accuracy:
< 30 cm rms
Rate of Turn:
90º / sec max
Start-up Time:
< 60 sec typical
Heading Fix:
< 10 sec
Satellite Reacquisition:
< 1 sec
Timing Output:
1PPS, 50 ns accuracy, CMOS
BEACON RECEIVER SPECIFICATIONS (G2B)
Channels:
2-channel, parallel tracking
Frequency Range:
283.5 to 325 kHz
Operating Modes:
Automatic (signal strength or
range) and manual
Compliance:
IEC 61108-4 Beacon Standard
COMMUNICATIONS
Serial Ports:
1 full-duplex RS-232 and 1
full-duplex RS-422,
Baud Rates:
Selectable 4800 - 115200
Correction I/O Protocol:
RTCM v2.3 (DGPS), RTCM SC-104
Data I/O Protocol:
NMEA 0183 / NMEA 2000® /
Proprietary ASCII
Heading Warning I/O:
Open relay system indicates
invalid heading
NMEA Heading Messages:
$GPHDT, $GPROT, $PSAT, $GPHDM, $GPHDG
Timing Output:
1PPS CMOS, active low, 10KΩ,
10pF load
ENVIRONMENTAL
Operating Temperature:
-32ºC to +74ºC (-25ºF to + 165ºF)
Storage Temperature:
-40ºC to +85ºC (-40ºF to + 185ºF)
Humidity:
0 - 99% non-condensing
POWER
Input Voltage:
10 to 36 VDC
Power Consumption:
~ 3 W nominal
Current Consumption:
~ 250 mA @ 12 VDC
Isolation:
Power supply isolated from serial
ports
Reverse Polarity Protect:
Yes
MECHANICAL
Weight:
G2: 2.2 kg (4.8 lb) / G2B: 2.7 kg
(5.9 lb)
Power/Data Connection:
18-pin female circular, IP67
sealed 15m cable
AIDING DEVICES
Gyro:
Provides smooth heading, fast heading reacquision
and reliable < 1º heading for periods up to 3 minutes
when loss of GPS has occured (static conditions)
Tilt Sensor:
Assists in fast start up of
heading solutions
* Depends on multipath environment, number of satellites in
view, satellite
geometry, baseline length (for local services), and Ionospheric
activity.
** Depends on multipath environment, number of satellites in
view, and
satellite geometry.
Download
Acrobat Document:
WEB_GNSS_G2_G2B_Rev_May_2015.pdf –
277.0 KB
|