PRODUCT DOWNLOADS

Technical Information

download

How to Install your Scanstrut

download

Scanstrut Brochure

download

Radar Guard

To find the correct Radar Guard for installation with your Scanstrut Mast Mount, please see the list below:

SC12 – SC25 Radar Guard*
SC16 – Not applicable
SC18 – SC24 Radar Guard
SC20 – SC27 Radar Guard
SC21 – SC26 Radar Guard (SC28 Radar Guard**)
M92722 – SC27 Radar Guard
M92698 – SC28 Radar Guard

* Not compatible with Furuno 19" DRS2D

** Use with Simrad DX60 & Garmin GMR 21 / GMR 41 antennas only

Cable Conduit

Cable Conduit is supplied in lengths of 1.5m which are easily cut to fit.

Please specify number of lengths required when ordering.

SC33 – Up to 14mm (0.5") cables
SC66 – Up to 18mm (0.7") cables

Mast Mount Adapter Kit

Fits Z-Spars, Selden, Isomat and Eurospars Masts, may be required for other ‘square’ fronted mast profiles.

FAQs

I have a Garmin GMR 18 dome and I find that it stands out from the mast when installing with a SC20 Mast Mount. Why is this?

This is because of the mounting footprint of the dome. If you rotate the dome through 180° before installing then it will solve the problem and the dome will be installed much closer to the mast.

When setting up the dome, you should be able to note through the chartplotter which way the dome is facing. Should you have any questions regarding the set up of the dome, please contact Garmin directly.

I require some replacement mast mount feet – is this possible?

You can order a replacement footpack for the product. The part no. is 15001 for all Mast Mounts excluding M92722 (Part no. 15001R).

Can I install onto a Carbon Mast?

Please speak to your rig manufacturer for advice.

Can I install onto a wooden mast?

Yes. However you would not use the rivets as supplied with our Mast Mounts. Wood screws have been used for installation but they are not recommended.

We would suggest making a stainless steel band to fit around at least half of the circumference of the mast, rivet the feet to the band and then bolt the band to the mast with a bolt that passes through the mast.

Please provide technical details of the size and type of pop rivets needed to fasten the M92698 mount to a sailboat mast. I purchased a used mount and I need replacement pop rivets, I can purchase Monel and stainless pop rivets locally, however i need to know exact specs.

We use 4.8mm Monel rivets, 16mm in length but check your mast wall thickness to be sure 16mm is the right length.

What type of paint is used on the Mast Mount?

We use colour code RAL9016 paint on all Mast Mounts and they have a professional powder coat finish with an etch primer and top coat.