Improved Performance For All Outboards (UP TO 300 HP)
Download Manual
The Power-Lift can improve the performance of
virtually any type outboard (UP TO 300HP). This unique outboard motor hydraulic lifting device
works independently of your power trim and tilt to allow the boat-motor-prop
combination to work at it's maximum efficiency. The Power-Lift gives you the
ability to adjust your motor down, for better out of the hole shots or up for
better top end speed, better fuel efficiency, and more prop clearance in shallow
water. With the touch of a switch the Power-Lift makes it easy to find that
optimum height for any condition while underway at full speed! Ideal for ski,
bass, or work boats. In order for your outboard to perform at its full potential
and efficiency, it should be adjusted to different heights at different speeds,
water conditions and loads in your boat. The Power-Lift will set your motor back
away from the transom 5 1/2 inches which allows the prop to run in "cleaner"
water giving the prop a better "bite" and eliminating prop slippage. The
system is made of 100% non-ferrous material which makes it impervious to
saltwater and freshwater use.
Superior Design
And Construction
Superior quality has made the Power-Lift the #1 selling transom jack
in the world! We have been manufacturing top quality transom jacks longer than
most of our competitors have been in business. No short cuts are taken at CMC.
Computer aided design and precision machining of the Power-Lift is done totally
at our facility so you can be sure to get the best quality transom jack at a
very competitive price. The Power-Lift utilizes a totally waterproof 12 volt DC
marine hydraulic system that is rated OVER 7800 Pounds of thrust. More lifting
capacity than any other transom jack on the market. It is 40% more powerful and
much more dependable than electro-mechanical transom jacks on the market. The
motor bracket moves up and down on a transom bracket by use of rollers Machined
from aluminum-bronze alloy. These rollers are highly impact resistant, Corrosive
resistant, and have a high load carrying capacity. Thrust is eliminated by the
stainless steel pin through this roller with a self lubricating non-metallic
material (G.S.M. Nylatron) used for thrust guides on either side of the rollers.
This feature eliminates any vibration or "shimmy" due to load applied from high
powered outboards. This patented design virtually eliminates any chance of
binding, which is common with other transom jacks.
A twelve time winner
on the highly competitive B.A.S.S. tournament trail, Brauer earned the coveted
B.A.S.S. Angler of the Year title in 1987. He also holds the single season money
winnings record on the B.A.S.S. circuit and is also first in career winnings
with over a million dollars. He has won the prestigious MegaBucks, Superstars,
and the 1998 Bassmaster Classic. He has qualified for 16 Bassmaster Classics.
Denny also earned the FLW Tour Angler of the Year in 1998 and he is also the
first angler to be featured on the coveted Wheaties Box.
Denny Brauer says, "I have been using a hydraulic CMC
Power-Lift jackplate on my boat since 1986. I run in a lot of rough water and my
Power-Lift has always been dependable hydraulically and structurally. The CMC
Power Lift really is the best jackplate on the market.''
Features Of Patented Hydraulic
Power-Lift® (U.S. Patent 4,482,330)
1.
Made of 1/2 inch 6061 T6 alloy aluminum extrusions and fastened with stainless
steel fasteners. Ideal for fresh or salt water use.
No welds or castings
to break.
2.
The dependable self contained and water proof hydraulic actuator has a lifting
capacity of 7853 pounds of thrust. More than any other transom jack. You will
have no problem lifting even a V-8 motor at full throttle. The hydraulic
actuator is mounted inside the structure of the Power-Lift, yet it is fully
accessible without removing the engine. There are no hoses to contain,
nor will you have to contend with mounting a pump and reservoir inside your
boat, as is the need with other transom jacks. The hydraulic actuator
is completely self-contained with its own fluid reservoir (eliminates the need
for hydraulic tank and hoses inside the boat). It contains a permanent magnet
motor for more power and R.P.M.. The cylinder within the actuator has twice the
lifting capacity than other transom jacks on the market. It contains a no-leak
seal and wiper seal that keeps dirt and water out of the working parts. The
system is made of 100% non-ferrous material which makes it impervious to
saltwater and freshwater.
3.
The patented roller design means less friction, longer wear, less maintenance,
and virtually no binding problems which are common with other transom jacks. The
roller assembly contains a stainless steel 3/4" pin with aluminum-bronze alloy
rollers. The roller is highly impact resistant, corrosive resistant, and has a
high load carrying capacity. This patented design virtually eliminates
any chance of binding which is common with other transom jacks.
Our most popular model, the PL-65 is rated for V-6 motors and smaller
and gives you 5" of vertical travel with 1-1/2" of adjustment on the motor
bracket and 1-1/2" of adjustment on the transom bracket. A TOTAL OF 8" OF
POSSIBLE ADJUSTMENT! It also can be purchased with stainless steel motor
rails, Model PL-65SS (for V-8 motors).
Download Manual
WARNING:
This product can expose you to chemicals including Di-n-hexyl Phthalate (DnHP)
which is known to the State of California to cause reproductive harm, and
Vinyl Chloride which is known to the State of California to cause cancer. For
more information go to 
