INTRODUCTION
SmartStick is a non-contact autopilot position sensor that mounts to Teleflex
outboard front mount cylinders (HC5345, HC5358*). The new SmartStick models
replace the previous generation AR4102 and AR4202 models. There are three new
SmartStick models available.
Features
• Non-contact sensing – no moving parts to wear
• Convenient installation – no linkages or external parts to mount
• Electrical components sealed in potting – corrosion resistant
……………………………………………………………………………………………………………………………………………..
SMARTSTICK ENHANCEMENTS INCLUDE
• No external black box – electronics integrated into sensor body, making
cable easy to route through rigging with no splicing
• 35’ of cable can be trimmed to any length and jacket is labelled
• Digital Electronics are more immune to electromagnetic interference (EMI) –
cleaner signal allows autopilot to perform better
• Installation of sensor is more convenient and faster
• Part Numbers are autopilot specific, no jumpers to cut
• Lower cost
*HC5358 must be installed on Yamaha and Evinrude
engines with AR4502 series SmartSticks to ensure adequate clearance. Installing
AR4502 series with HC5345 on Yamaha and Evinrude outboards may result in
interference between the sensor and the cylinder.
back to top……………………………………………………………………………………………………………………………….
SPECIFICATIONS
AR4502 SERIES SPECIFICATIIONS |
Range |
8.0” |
Resolution |
0.012” |
Linearity |
0.048” |
Repeatability |
0.024” |
Environmental Resitstance |
- Salt Spray 1000 hours
- IEC IP67 (Submersible to 1m)
- Immune to dirt, oil, SAE Fluids
- Thermal Shock and Vibration
Resistant (MIL-STD810F) |
back to top……………………………………………………………………………………………………………………………….
ORDER GUIDE
MODEL |
AUTOPILOT |
OUTPUT |
AR4502RM |
Ray Marine Installations Only |
2.2V to 2.8V |
AR4502SI |
SimRad Installations Only |
2.8kHz to 4.0kHz |
AR4502 |
Generic |
0.5V to 4.5V |