VETUS Hydraulic Bow Thruster 905 Lb Including Hydro Motor 22Kw, 29HP, BOW410HMD
No Tunnel, Control, Cable included
The hydraulic motor is driven by a hydraulic pump. If a hydraulic pump and
associated tank are already installed on board, then , in most cases, this
assembly can be used for driving the bow thruster too. In addition to the
pump and the hydraulic stage tank, Vetus can supply the required load sensing
and control devices, as well as the high pressure hydraulic hoses, complete with
end fittings.
All these hydraulic bow thrusters may be fitted to fiberglass, steel or
aluminum tunnels or used as a stern thruster using the appropriate installation
kit
The three most powerful vetus bow thruster can also be driven in a safe
manner using a specially prepared diesel engine, instead of pump on the main
engine.
In this case, the matching hydraulic pump will be supplied as part of the
powerpack. Installing a powerpack on board can considerably reduce the
required generator set capacity, by operating hydraulic functions which are
normally electrically powered.
Technical data |
121 lbf |
210 lbf |
352 lbf |
507 lbf |
665 lbf |
905 |
1215 |
Hydraulic motor power kw(hp) |
3.5(4.7) |
6.0(8) |
9.5(12.7) |
12.5(16.8) |
20 (27) |
22 (29) |
33 (44) |
hydraulic motor speed, rpm |
3000 |
4100 |
3300 |
1900 |
2000 |
1920 |
1920 |
hydraulic motor capacity cu.inch/rev |
.25 |
.25 |
.42 |
1.03 |
1.64 |
2.75 |
2.75 |
flow rate gal/min |
3.4 |
4.7 |
6.3 |
8.85 |
15 |
24 |
24 |
operating pressure, psi |
2393 |
3335 |
3625 |
3336 |
3190 |
2610 |
4061 |
Internal tunnel diameter (in) |
5 29/32 |
7 9/32 |
9 7/8 |
11 13/16 |
11 13/16 |
15 3/4 |
15 3/4 |
Technical documentation
-
BOW..D Installation recommendations for bow thrusters (EN, NL, DE, FR, ES, IT,
DK, SE, NO, FI)
-
-
View/Download
-
BOW55HM - BOW310HM Operation manual and installation (EN, NL, DE, FR, ES, IT)
-
-
View/Download
-
Installation recommendations for bow thrusters (EN)
-
-
View/Download
|