Xantrex Freedom SW3012 12V Input 110V Output, 3000W Pure Sinewave Inverter Charger 815-3012
Xantrex Freedom SW3012 Inverter/Charger
815-3012
12V, 3000W - 120 Vac / 60 Hz
Powerful. Configurable. Versatile...
The NEW GENERATION Freedom SW series represents highly sophisticated and
advanced inverter/ chargers available in 3000 W with 150 A charger and 2000 W
with 100 A charger models.
Product Description
The second generation 3000 watt model has been completely redesigned to include
many of the same great features found in its high power counterpart.A key
feature enhancement is 'Generator Support Mode' which enables the Freedom SW to
supplement a generator when AC loads exceed the generator's capacity. The new
generation models also feature improved AC transfer/AC input detection time,
providing the ability to transfer AC loads to batteries in less than 10
milliseconds when the incoming grid or generator power is lost. Connected loads
are almost unable to feel the power transition due to this quick transfer time.
Both models are approved to UL458 with marine supplement, CSA, ABYC and FCC,
Class B requirements.
NEW - PARALLEL AND SERIES STACKING
Parallel stacking enables the Freedom SW inverter/chargers to double the AC
output in inverter mode. Series stacking enables the Freedom SW
inverter/chargers to generate 120/240 V split phase output2
2 AC source must be split phase, requires Stacking Cable (part# 808-9005)
Application
Designed for a variety of mobile applications such as commercial, emergency and
recreational vehicles, marine vessels, construction and military equipment.
Product Features
-
Pure sine wave output to operate sensitive electronics
-
Advanced configuration options for customized applications
-
Parallel and series stacking capability
-
Built-in transfer switch automatically transfers between inverter power and
incoming AC power
-
Power factor corrected, multi-stage charger for fast, efficient charging
-
Temperature compensated charging for a vareity of climate conditions
-
Ignition lockout feature helps prevent unnecessary battery drain when the
alternator is not providing power3
-
Wide operating temperature range: -4°F to 140°F (-20°C to 60°C)
-
Conformal coated circuit boards for humid environments
-
Dual input / Dual output AC interface for 3000 W model
-
Ability to charge batteries drained to extremely low voltage
-
Compatible with the Xantrex Automatic Generator Start4 (Part#
809-0915)
3When
used with the remote panel
4Sold
separately
Protection Features
-
Battery over-voltage and under-voltage protection
-
Over-temperature shutdown
-
Automatic overload protection
-
Short-circuit protection
-
Integrated, resettable AC breakers
Electrical
Specifications — Inverter |
Output
power (continuous at 40°C) |
3000 W |
3000 W |
6000 W |
Peak output
current |
75 A |
Output
frequency |
60 Hz +/-
0.2 Hz |
Output
voltage |
120 Vac |
120 Vac |
True sine
wave |
Optimal
efficiency |
94% |
No-load
power draw (inverting) |
<1.5 Adc |
Input DC
voltage range |
Input DC
voltage range |
AC
connections |
Split phase
in / Dual out |
Electrical
Specifications — Battery Charger |
Output
current (continuous at 25°C) |
150 A |
Output
voltage |
12 Vdc |
Output
voltage range |
5 — 16 Vdc |
Charge
control |
3 stage
with manual equalize |
Charge
temperature compensation |
Remote
battery sensor (included) |
Optmial
Efficiency |
> 85% |
AC input
power factor (maximum charge) |
0.98
typical |
Input
current (for maximum charging) |
24 A rms
nominal |
Input AC
voltage |
120 Vac |
Input AC
voltage range |
85 — 140
Vac |
Dead
battery charge |
> 5 Vdc |
General
Specifications |
Compatible
battery types |
LiFePO4 /
Flooded / gel / AGM* |
Transfer
relay rating |
2 legs at
30 A each |
Transfer
time (AC to inverter and inverter to AC) |
< 20 ms |
Optimal
operating temperature range |
— 4°F to
140°F (- 20°C to 60°C) |
Storage
ambient temperature range |
— 40°F to
185°F (- 40°C to 85°C) |
L x W x H |
7.75 x 13.5
x 15.25" (197 x 343 x 387 mm) |
What's in the Box:
- Freedom SW 3000
- Battery Temperature Sensor
(BTS)
- DC terminal covers (one red,
one black) with two sets of #6-32 screws
- Two Xanbus network
terminators
- Two sets of 5/16"-18 nuts
and washers for the DC terminals
- Owner’s and Installation
Guides
|