Xantrex Freedom SW2012 12V Input 110V Output 2000W Pure Sinewave Inverter Charger 815-2012
Xantrex Freedon SW2012 Inverter/Charger
815-2012
12V, 2000W - 120 Vac / 60 Hz
Powerful. Configurable. Versatile...
The Freedom SW series represents highly sophisticated and advanced inverter/
chargers available in 3000 W with 150 A charger and 2000 W with 100 A charger
models.
Product Description
The second generation 2000 watt model has been completely redesigned to include
many of the same great features found in its high power counterpart.A key
feature enhancement is 'Generator Support Mode' which enables the Freedom SW to
supplement a generator when AC loads exceed the generator's capacity. The new
generation models also feature improved AC transfer/AC input detection time,
providing the ability to transfer AC loads to batteries in less than 10
milliseconds when the incoming grid or generator power is lost. Connected loads
are almost unable to feel the power transition due to this quick transfer time.
Both models are approved to UL458 with marine supplement, CSA, ABYC and FCC,
Class B requirements.
PARALLEL AND SERIES STACKING
Parallel stacking enables the Freedom SW inverter/chargers to double the AC
output in inverter mode. Series stacking enables the Freedom SW
inverter/chargers to generate 120/240 V split phase output2
2 AC source must be split phase, requires Stacking Cable (part# 808-9005)
Application
Designed for a variety of mobile applications such as commercial, emergency and
recreational vehicles, marine vessels, construction and military equipment.
Product Features
-
Pure sine wave output to operate sensitive electronics
-
Advanced configuration options for customized applications
-
Parallel and series stacking capability
-
Built-in transfer switch automatically transfers between inverter power and
incoming AC power
-
Power factor corrected, multi-stage charger for fast, efficient charging
-
Temperature compensated charging for a vareity of climate conditions
-
Ignition lockout feature helps prevent unnecessary battery drain when the
alternator is not providing power3
-
Wide operating temperature range: -4°F to 140°F (-20°C to 60°C)
-
Conformal coated circuit boards for humid environments
-
Dual input / Dual output AC interface for 3000 W model
-
Ability to charge batteries drained to extremely low voltage
-
Compatible with the Xantrex Automatic Generator Start4 (Part#
809-0915)
3When
used with the remote panel
4Sold
separately
Protection Features
-
Battery over-voltage and under-voltage protection
-
Over-temperature shutdown
-
Automatic overload protection
-
Short-circuit protection
-
Integrated, resettable AC breakers
Inverter
Specifications |
Freedom SW 2012 - 815-2012 |
Freedom SW 3012 - 815-3012 |
Output power (continuous @ 40 C) |
2000W |
3000W |
Surge rating (5 seconds) |
4000W |
6000W |
Peak output current |
55A |
80A |
Output frequency |
60Hz +/-
0.2hz |
60Hz +/-
0.2hz |
Output voltage |
120 Vac |
120 Vac |
Output wave form |
Pure sine
wave |
Pure sine
wave |
Optimal efficiency |
90% |
90% |
No-load power draw (inverting) |
3Adc |
3Adc |
Input DC voltage range |
10 - 16Vdc |
10 - 16Vdc |
AC connections |
Single
phase in/out |
Split phase
in/dual out, Dual in / dual out |
Charger
Specifications |
|
|
output current (continuous @ 25 C) |
100A |
150A |
output voltage |
12Vdc |
12Vdc |
Output voltage range |
3 - 16Vdc |
3 - 16Vdc |
Charge control |
3 stage
with manual equalize |
3 stage
with manual equalize |
Charge temperature compensation |
Remote
battery sensor (included) |
Remote
battery sensor (included) |
Optimal efficiency |
>85% |
>85% |
AC input power factor (maximum charge) |
0.98
typical |
0.98
typical |
Input current (for maximum charging) |
16A rms nominal |
24A rms nominal |
Input AC voltage |
120vac |
120vac |
Input AC voltage range |
85-140Vac |
85-140 Vac |
Dead battery charge |
>3Vdc |
>3Vdc |
General
Specifications |
|
|
Compatible battery types |
Flooded/Gel/AGM |
Flooded/Gel/AGM |
Tranfer relay rating |
1 leg 30A |
2 legs 30A
each |
Transfer time ( AC to inverter and Inverter to
AC) |
< 20ms |
< 20ms |
Optimal operating temperature range |
-4°F to
140°F |
-4°F to
140°F |
Storage ambient temperature range |
-40°F to
185°F |
-40°F to
185°F |
Unit Dimension |
7.75" x
13.5" x 15.25" |
7.75" x
13.5" x 15.25" |
Unit Weight |
60.5lbs |
73.7lbs |
Warranty |
2 years |
2 years |
|