HS5 SeaTalkhs Network Switch
The HS5 SeaTalkhs Network Switch works with Raymarine's latest c-Series and
e-Series Multifunction Displays and accessories and serves as the central
connection point for the SeaTalk High Speed Network.
The HS5 uses the new Raynet waterproof connection system found on c-Series and
e-Series displays, and provides a secure, reliable weather tight connection. Up
to 5 displays or other peripherals can be connected directly to the HS5 network
switch. The 5 ports all support 10 or 100 Megabit speeds when connected to
peripherals like displays, scanners, sounder modules or thermal cameras. The 5th
port also supports Gigabit speed for interconnecting multiple HS5 switches
together on very large networks.
The compact HS5 works on both 12V and 24V dc power systems, and is simple to
install with large keyhole mounting slots and front-facing status indicators.
HS5 - What's in the box?
The HS5 is available with the features, options, and accessories described
below.
Refer to the packing list enclosed with your HS5 shipment to determine the
actual contents of your package.
- Network switch
- Fixing screws
- Power cable (red and black)
- Documentation pack, consisting of:
- Installation instructions
- Mounting template
- Warranty policy
|
|
 |
Multistation Networking
SeaTalkhs data is quickly distributed to
other SeaTalkhs equipment using the HS5
switch. Information shared using the SeaTalkhs
network includes shared cartography (between compatible displays), digital radar
data and sonar data.
 |
|
Key Features
-
12V or 24V DC
-
5 port - Watertight RayNet connection
-
10Mbit/sec, 100Mbit/sec and 1000 Mbit/sec (5th port only) supported
network speeds.
-
Gigabit 5th port allows higher speed across switches should a 2nd switch
be necessary
|
Multiple Switches
Systems with more than 5 SeaTalkhs
devices require more than one network switch. Network switches can be
connected together ("daisy-chaining") for this purpose.
The network switch provides a dedicated high-speed (1000 Mbit/S) port
for connecting switches together while still retaining full data
bandwidth throughout the system.
Each switch only has one high-speed port (port 5), so you can only
connect up to 2 switches using the high-speed (1000 Mbit/S) connection.
Any additional network switches must be connected together using a
standard speed (100 Mbit/S) port.
Note: The maximum number of SeaTalkhs
devices that can be connected in any single system is 25.
|
|
 |
Possible systems
Basic System
-
Network switch
-
Multifunction display
-
Radar scanner
-
Thermal camera
|
|
|
Expanded System
- Thermal camera
- Multifunction display
- Network switch
- Connection between 2 network switches (Port 5 must be used for 1000
Mbit/Sec operation)
- Radar scanner
- Antenna for Sirius weather receiver (US only)
- Sirius weather receiver (US only)
- Digital Sounder Module (DSM)
|
| Product Number |
A80007
|
|
| Dimensions
(L x D x H) |
10 in x 3.5 in x 3 in
(252.5 mm x 88.6 mm x 75mm) |
| Nominal supply voltage |
12 or 24 V dc
|
| Operating voltage range |
9 - 32 V dc
|
| Power consumption |
< 2.5 W
< 600 mA @ 12 V
|
|
Environmental |
Installation environment:
Operating temperature = -13ºF to 131ºF (-25ºC to +55ºC)
Storage temperature = -13ºF to 158ºF (-25ºC to +70ºC)
Relative humidity: max 93%
Waterproof to IPX6
|
|
Conformance |
Europe: 2004/108/EC
Australia and New Zealand: C-Tick, Compliance Level 2
China: CCS certification
|
|
Supported connection protocols |
SeaTalkhs
|
| Supported connection
speeds |
10 Mbit/S
100 Mbit/S
1000 Mbit/S
|
WARNING:
This product can expose you to chemicals including Di-n-hexyl Phthalate (DnHP)
which is known to the State of California to cause reproductive harm, and
Vinyl Chloride which is known to the State of California to cause cancer. For
more information go to 
