GP1040-09 SystemPod Pre-Cut for Garmin echoMAP™ 92sv/93sv/94sv/95sv & 1
Instrument
Instrument Cut Out:3.6" Hole
NavPod GP1040 Series for 9.5" Guard SystemPods are for mounting multiple
pieces of electronics in one NavPod. This is a good way to reduce the height
of a system. In addition to mounting a radar or chartplotter, you can have
room for an autopilot, instrument, stereo controller, or VHF mic. A SystemPod
is best mounted on a Single Bend AngleGuards.
The Hi-Gloss Material
- NavPods are manufactured with a custom co-extruded acrylic capped ABS
material. We use the absolute best UV resistant material that provides a
very high gloss white finish that matches gel-coated fiberglass. The Gen3
enhancements now include a thicker gauge material that improves strength and
provides for better structural rigidity.
The Waterproof Seal
- All NavPods are manufactured with a double gasket system providing an
excellent watertight seal between the front and back of the NavPod for
protection of your Marine Electronics. NavPods are made to withstand the
harshest of wet offshore boating conditions. Gen3 enhancements include a
thicker external silicone gasket with improved flush fit. The internal EPDM
gasket is now 50% thicker and is not subject to "compression set" like many
rubber compounds. This is important when you need to open the NavPod in the
future to service your electronics.
The Nickel Chrome Plated Screws
- We use all stainless steel mounting hardware that is supplied with each
NavPod. Large round head tamperproof screws have deeper sockets for the
NavPod wrench for better holding ability when tightening than the previous
screws. For Gen3 we provide nickel chrome-plated stainless steel tamperproof
screws for security combined with a little bling!
The Manufacturing Process
- Heavy-gauge thermoforming is considered an art since many processes come
into play. It all starts with the design and development of the tooling. We
are fortunate to have experienced in-house design engineers who utilize CAD
programs like Solidworks, Catia and AutoCad. Surfcam is used to interface
with our CNC machining centers to produce quality tools with precision
tolerances.
The Commitment to Quality
NavPod is committed to producing the best possible waterproof housing for
Marine Electronics. Now with two decades of experience under our belt, we are
confident you will have years of trouble free service and a long lasting high
gloss finish. We will stand behind our commitment by now offering a 10-year
warranty on all new Gen3 NavPods.
WARNING:
This product can expose you to chemicals including Di-n-hexyl Phthalate (DnHP)
which is known to the State of California to cause reproductive harm, and
Vinyl Chloride which is known to the State of California to cause cancer. For
more information go to 
