Icom M605 Fixed Mount 25W VHF with Color Display & Rear Mic Connector

Fixed Mount VHF with Flexible System Configurations

The M605 is not just a radio. It’s a system that allows the user choices on how to set up the radio with up to three stations. Boaters can now add an exclusive complete display as another station on the vessel along with two COMMANDMICS™. Customers will appreciate the radios large bright display that includes night mode to view easily in the dark.

Output power:		25W
Hailer:		30W listen back hailer
Horn/Foghorn:		Built-in
GPS:		GNSS antenna included
Waterproof rating:		IPX8
Versions:		Radio without AIS receiver

Configuration flexibility

The M605 gives the user flexibility in setting up their radio system on their boat. Remotely control up to three controllers using all the M605 functions with the HM-195 series COMMANDMIC™ and/or the RC-M600 Command Head. Either option can be used as an intercom between the radio and the unit, as well.

Use one of the three combinations when setting up your M605:

M605 + three COMMANDMICS
M605 + two COMMANDMICS + one Command Head
M605 + two Command Heads + one COMMANDMIC

Large color display

Bring on the color. The M605’s large 4.3” color TFT LCD display provides nearly a 180 degree viewing angle. The high resolution characters and function icons along with the directional keypad and soft keys provide an intuitive user interface. The night mode screen provides comfortable operation in the dark. Most used functions are assigned to soft keys (at the bottom of the display) for quick one push function access. The large ten-key pad enables users to smoothly enter channel numbers, MMSI numbers with ID names and much more.

NMEA 2000™ and NMEA 0183 connectivity

Using NMEA 2000™ connectivity, the radio can exchange GNSS, DSC call information data, radio frequency, and PGN list data on the network. NMEA 0183/-HS GNSS position data can also be converted to NMEA 2000™ data for other equipment.

Additional features

Active noise cancelling
Last call voice recording saves the last two minutes of the last incoming call or start recording manually
Integrated GNSS receiver
Class D DSC
Weather & alert channels
AquaQuake® draining function
Instant access to channel 16 and channel 09 call channel

Specifications

General
Frequency Range Tx Rx CH70	156.025–161.600 MHz 156.025–162.000 MHz 156.525 MHz
Usable channels	USA, CAN, INT, WX channels
Type of emission	16K0G3E (FM), 16K0G2B (DSC)
Power supply requirement	13.8 V DC (11.7–15.9 V DC)
Current drain Tx (at 25W output) Rx (Maximum audio)	6.0 A 8.0 A
Operating temperature range	–20°C to +60°C; –4°F to +140°F
Antenna Impedance	50Ω (SO-239)
Weight (approximately)	1510 g; 3.3 lb

Transmitter
Output power (at 13.8 V DC)	25W, 1W
Max. frequency deviation	±5 kHz
Frequency tolerance	±5 ppm
Spurious emissions	Less than –70 dBc (at 25 W)
Adjacent channel power	More than 70dB
Residual modulation	More than 40dB

Receiver
Intermediate frequency CH70	30.15MHz, 450kHz (1st/2nd) 21.70 MHz, 450 kHz (1st/2nd)
Sensitivity 12dB SINAD CH70 (1% BER)	0.22 μV typical 0.71 μV emf typical
Adjacent channel selectivity CH70 (1% BER)	More than 80dB More than 80 dBμ emf
Spurious response CH70 (1% BER)	More than 77dB More than 73dBμ emf
Intermodulation CH70 (1% BER)	More than 80dB More than 73dBμ emf
Hum and noise ratio	More than 40dB
Audio output power External speaker	(at 10% distortion) More than 15W with a 4Ω

Measurements made in accordance with TIA/EIA 603 and IEC 62238. All stated specifications are subject to change without notice or obligation.

Applicable U.S. Military Specifications

Standard	MIL 810 G
Standard	Method	Proc
Low Pressure	500.5	I,II
High Temp	501.5	I,II
Low Temp	502.5	I, II
Temp Shock	503.5	I - C
Solar Radiation	505.5	I
Rain	506.5	I
Humidity	507.5	II
Salt Fog	509.5	–
Dust Blowing	510.5	I
Immersion	512.5	I
Vibration	514.6	I
Shock	516.6	I, IV