Simple. Independent. Flexible.
The PowerCombi is a pure sine wave inverter/charger offering grid quality AC
power and battery charging in one low profile design. Designed to be an
independent inverter / charger, it yet can easily be integrated into a MasterBus
network (with additional interface).
With a built-in transfer switch, 2x surge for 3 seconds and on-site dipswitch
programming—the PowerCombi offers simple installation with multiple operating
modes, and can charge various battery chemistries—including a custom profile for
use with Li-ion.
Full certifications make it perfect for use in RV's, boats, and specialty
vehicles. Add a battery temperature sensor (BTS), remote display and a
communication interface for custom applications.
|
Specifications sine
wave inverter |
Efficiency |
89 %
|
|
Specifications
battery charger |
Input voltage range |
10 – 15.5
V |
Nominal input voltage |
12 V
|
Max. charge current at 25 °C / 77 °F |
100 A DC
|
|
Specifications
transfer system |
Transfer speed |
30 A
(10ms) |
|
Communication &
monitoring |
Communication |
MasterBus
compatible via PowerCombi MasterBus Interface (part # 77032900) |
|
General
specifications |
Flat battery support (minimum charging) |
no (6 V)
|
Continuous power at 25 °C / 77 °F, cos phi 1 |
2000 W
|
Continuous power at 40 °C / 104 °F, cos phi 1 |
2000 W
|
Surge power (3s) |
4000 W
|
AC voltage / frequency |
120 V –
50/60 Hz selectable HF - pure |
Idle consumption |
36 W
|
Dimensions, hxwxd |
453 x 251
x 116 mm
17.8 x 9.9 x 4.6 inch |
Weight |
6 kg
13.2 lb |
Approvals |
UL458 &
Supplement SA/CSA C22.2, UL 1741 no. 107.1-01KKK-A-1822F (pending,
specifications subject to change) |
|
Technical
specifications |
Battery types |
flooded,
Gel, AGM, custom |
Temperature range (ambient temp.) |
-20 °C to
60 °C
-4 °F to 140 °F |