FM-S10SB FM Series 10" 400W Flush Mount Marine Subwoofer - Square Grill - Black
Clear audio, clean aesthetics, all-class.
Engineered for high-quality audio reproduction with innovative design
aesthetics, Fusion's FM Series flush mount marine subwoofers are designed to
deliver high-quality bass to your vessel in a sleek and minimalistic form factor
to meet the latest boat design trends.
Featuring an intelligent mounting system for non-intrusive, easy installation,
the FM Series subwoofers are designed to be flush mounted with a mounting flange
no thicker than 3mm [1/8"] for a premium, visually-appealing, near-flat finish.
With an IP65 weatherproof rating, True-Marine™ accreditation and an
industry-leading 3-year warranty, you can enjoy peace of mind that your FM
Series subwoofers are built to last on board season after season.
Features:
-
Optimized 2.1 Configuration: When connected with a pair of FM Series speakers
and a Fusion Multi-Zone™ stereo with DSP, you have the option of creating a
2.1 audio zone to simplify installation and reduce system cost by adding bass
without the need for an external amplifier.
-
Quality Audio Reproduction: Enjoy quality low frequency audio at any volume
level.
-
Innovative Design Aesthetics: Designed with a low profile, near-flat
installation for a visually appealing finish, the FM Series will complement
the aesthetics of any vessel.
-
Non-Intrusive Mounting System: The FM Series uses 'speaker legs' that keep the
subwoofer in place without creating any screw holes to your vessel.
-
True-Marine™ Designed and Engineered: Extensively tested to perform in the
harsh marine environment, the FM Series carry an IP65 weatherproof rating
along with True-Marine accreditation.
-
Designed To Comply With ISO12216: Tested to international standards for
pressure and watertightness, it recognizes the FM Series are designed and
built to the highest industry standards for quality and robustness.
Specifications:
-
Subwoofer Size: 10"
-
Peak Power: 400W
-
RMS Power Rating: 120W
-
Efficiency (1W/1M): 87 dB
-
Frequency Response: 30 Hz - 2 kHz
-
Nominal Impedance: 4 Ohms
-
Recommended Amplifier Power (RMS): 40-300 W/Ch
-
Cone/Surround Material: Polypropylene with rubber surround
-
Mounting Diameter Clearance: 269mm x 269mm (10-9/16" x 10-9/16")
-
Mounting Depth Clearance: 140mm (5-1/2")
-
Optimum Enclosure Volume (Sealed enclosure, fully filled with absorption
material): 40L
-
Operating Temperature Range: 0-50°C (32-122°F)
-
Storage Temperature Range: -20-70°C (-4-158°F)
-
Water and Dust Resistance (IPX rating): IP65
-
Warranty: 3 Years
WARNING:
This product can expose you to chemicals including Di-n-hexyl Phthalate (DnHP)
which is known to the State of California to cause reproductive harm, and
Vinyl Chloride which is known to the State of California to cause cancer. For
more information go to 
