XKA Aluminum Alloy Trim Tab - 9 x 24
The Lectrotab Aluminum Alloy trim tabs are uniquely designed to meet the needs
of Aluminum hulled boats and are an economical option for all boats. All
Aluminum Alloy tabs are fabricated with an extremely strong "no-break"
polypropylene hinge. All Aluminum tabs are sealed with a corrosion resistant
epoxy coating.
Combined with a precision-engineered actuator, this kit is built to combine
quiet operation with a non-hydraulic, maintenance free design. The unit is
corrosion free, ensures very accurate tab positioning, provides maximum lift
force, and is totally self-contained for easy installation. The actuator
assembly is packaged in a non-metallic permanently sealed housing. No
components need to be installed inside the boat.
Most importantly, unlike hydraulic trim tabs, there is no oil to leak out. The
actuator incorporates either a standard or low profile transom mounting
bracket.
*Control switch not included
Features:
-
All Tabs sealed with a corrosive resistant epoxy coating
-
Equivalent strength to 10 gauge stainless steel
-
"No Break" polypropylene hinge tested over 300,000 cycles to a 90° bend
without failure
-
Upper ram seal location cannot be damaged due to fouled ram or barnacle growth
-
Utilizes internal pressure equalization system
-
Internal brake system prevents unwanted tab movement when under way or backing
down
-
Quiet operation
-
Actuators are fully load tested to push 1000 lbs of force
-
Non-metallic external structure which cannot corrode and will not deteriorate
in the sun or under water
Technical Specifications:
-
Trim Tab Size (L x W) - 9" x 24" (23 x 61 cm)
-
Boat Length - 24' to 37' (7 to 11 M)
-
Trim Tab Material - Marine grade 6005-T5 Aluminum Alloy
-
Actuator DC Voltage - 12 V
-
Actuator Stroke Length - 2.25" (57 mm)
-
Actuator Cable Length - 23' (7 M)
-
Actuator Vertical Height - 11.875" (302 mm)
In the Box:
-
Two (2) Aluminum Alloy tabs
-
Two (2) actuators w/23' (7 M) cables
-
Instruction Manual