The new Power Series by Maretron replaces standard mechanical circuit
breakers and switches with state-of-the-art digital power distribution.
Customers looking to achieve the power and convenience of advanced home
automation for their boats will appreciate MPowerТs seamless, reliable operation
as well as simple and cost-effective installation.
MaretronТs new CLMD12 offers programmable multi-channel DC electronic load
modules in an innovative, scalable configuration, each capable of switching up
to 5, 10, or 12 Amps with a total current capacity of 75 Amps. The CLMD12
provides fast switching and low-loss solid state ON/OFF switches. The CLMD12
connects directly to the NMEA 2000о network, allowing breakers to be turned on
and off from a Maretron DSM-Series display or any device running Maretron
N2KViewо (including MaretronТs TSM-Series multifunction displays and MBB-Series
black boxes or smart phones/tablets running N2KView software).
Additionally, since the CLMD12 supports standard NMEA 2000 messages, it can be
controlled by any NMEA 2000 device. The CLMD12 easily handles resistive DC loads
like lights and inductive DC loads like pumps and motors. An added benefit of
the CLMD12 is that it reports the current through each of the 12 breakers. This
allows you to determine if loads are drawing too little electrical current such
as burnt-out bulbs, or if the loads are starting to draw too much electrical
current.
* CLMD12 requires configuration using Maretron USB100 or IPG100 plus PC running
N2KAnalyzer V3.
-
NMEA 2000о Interface
-
IP67 Rated
-
Ignition Protected
-
Opto-Isolated from NMEA 2000о, eliminating potential ground loops
-
Twelve (12) dimmable Electronic Circuit Breakers (ECBs) for ON/OFF control
over NMEA 2000о network
-
Each breaker is capable of carrying up to 5,10, or 12 Amps
-
Individual breaker electrical current monitoring
-
Breakers can have power-up states defined (ON, OFF, or previous states)
-
Breakers can be locked against inadvertent actuation
-
Seven (7) discrete inputs configurable as Active High, Active Low
-
Automatic ECB over current shutdown
-
Automatic ECB thermal shutdown (Over temperature Protection)
Brand: Maretron
Comm Method: NMEA
2000о
Connector: Deutsch
12 Pin, NMEA2000о Micro
Exterior Color: Black
Exterior Color: Black
Inputs: 7
Outputs: 12
WARNING:
This product can expose you to chemicals including Di-n-hexyl Phthalate (DnHP)
which is known to the State of California to cause reproductive harm, and
Vinyl Chloride which is known to the State of California to cause cancer. For
more information go to 
