Furuno DI-FFAMP Deep Impact TruEcho CHIRP Fish Finder Amplifier - 2kW or 3kW
GO DEEPER WITH MORE POWER THAN YOU THOUGHT WAS POSSIBLE
You spoke. We listened. And now we delivered! NavNet TZtouch3 incorporates a
powerful internal 1 kW TruEcho CHIRP™ Fish Finder. For many, this is the perfect
Fish Finder, but for some, they need more power. So, we proudly bring you Deep
Impact (DI-FFAMP), a high-powered 2/3 kW amplifier that connects to the internal
TruEcho CHIRP™ Fish Finder. But if that's not enough, Deep Impact allows you to
connect a 5 kW or 10 kW transducer with the BT-5. Go big or go home!
Welcome to the future of high-powered, deep dropping, full-featured Fish
Finders. We’re not talking about your daddy’s Fish Finder. We took our
commercial fishing know-how and put it into NavNet TZtouch3, giving you
capabilities that a recreational line of Fish Finders has never seen. Reach
unfathomable depths with Deep Impact!
-
FIND MORE FISH WITH TruEcho CHIRP™NEW
The internal 1 kW TruEcho CHIRP™ Fish Finder inside NavNet TZtouch3 is
designed to operate across a wide range of frequencies utilizing a broadband
transducer and delivers significant advantages to signal clarity & target
definition. Due to the constant sweeping of frequencies, it is capable of
gathering more & higher quality data than traditional Fish Finders.
-
Deep impact TruEcho CHIRP™NEW
High-powered TruEcho CHIRP™ is available for NavNet TZtouch3 by interfacing
the Deep Impact (DI-FFAMP) to the internal Fish Finder. Deep Impact boosts
your power to a 2/3 kW CHIRP Fish Finder. High-powered TruEcho CHIRP™
ensures that your echoes come back strong & clear at every depth range,
displaying fish targets and bottom structure with amazing clarity.
Connection diagram
-
Bottom DISCRIMINATION display*
Bottom Discrimination provides detailed information about knowing the
make-up of the seabed & categorizing it into four different categories: Rocks,
Gravel, Sand, and Mud. The make-up of the seabed can be tremendously helpful
information when looking for fishing grounds, as well as for finding favorable
anchoring spots.
*Feature works with certain transducers. Check to ensure your
transducer is compatible.
-
ACCU-FISH™ fish size analyzer*
The ACCU-FISH™ algorithm analyzes echo returns in order to compute
individual fish size. The algorithm is capable of calculating fish size
ranging from 10 cm up to 199 cm (<4" to <78") long. Fish depth can also be
displayed.
In some instances, fish size indicated on the NavNet TZtouch3 may differ from
its actual size. Please carefully read the operator’s manual before utilizing
this feature.
In addition to the built-in Fish Finder, you can also connect the DFF3,
BBDS1, or DFF-3D via Ethernet.
More power to see 120˚PORT-STARBOARD
and in 3D
An edge over competition.
The DFF-3D Multi Beam Sonar operates at 165 kHz, giving you
fantastic depth penetration while still displaying echoes in high-resolution.
Compared to a 40˚ ultra-wide transducer, you will see 3-times the area around
your boat, helping you to find fish you might have otherwise missed. Plus, you
can see which side of the boat they are o
Normal down-sounding Fish Finders have a beam angle of 40˚ or less. But with
the DFF-3D Multi Beam Sonar, you see 120˚ port-starboard for 200 m (650+ ft).
Plus, with the power of the DFF-3D, you can see fish directly below the boat 300
m (nearly 1,000ft). When you match this with the Deep Impact TruEcho CHIRP™,
you’ll have the ultimate fishing machine!
-
EASILY SEE WHERE TO DROP LINES
When you find fish, you can quickly drop a mark on your Chart Plotter for
a return drift. Then looking at the DFF-3D’s Cross Section and Side Scan
Modes (right side of the screen), you can easily determine which side of the
boat the fish are on, how deep they are, and how far out from the boat they
are swimming. It’s almost like you have a tracker attached to them!
-
USE DFF-3D WITH YOUR FISH FINDER
This is a powerful combination that helps you get on the fish like never
before. Use your standard Fish Finder on low-frequency to go deep (left side
of the screen) and then use the DFF-3D for your high-frequency to see fish
in the water column. With the 3D History and Triple Beam Modes, you can
easily see which side of the boat the fish are located, so you know where to
drop your line.
Specifications
NavNet Network Fish Finders
|
TruEcho CHIRP™ Fish Finder
|
Bottom Discrimination Sounder
|
Sounder
|
DEEP IMPACT TruEcho CHIRP™
|
|
MODEL: DFF1-UHD
|
MODEL: BBDS1
|
MODEL: DFF3
|
MODEL: DI-FFAMPNEW
|
TRANSCEIVER &
DISPLAY
|
Display Modes
|
Single (High or Low frequency), Dual (Both High
and Low frequencies), Bottom-lock, Bottom-Zoom, ACCU-FISH™, Bottom
Discrimination, Marker Zoom, A-Scope
|
Single (50 or 200 kHz), Dual (50 and 200 kHz),
Bottom-lock, Bottom-Zoom, ACCU-FISH™, Bottom Discrimination,
Marker Zoom, A-scope
|
Single (high or low), Dual (high and low),
Bottom-lock, Bottom-Zoom, ACCU-FISH™*, Marker Zoom, A-scope * with
CA50/200-1T only
|
Single (High or Low frequency), Dual (Both High
and Low frequencies), Bottom-lock, Bottom-Zoom, A-Scope
|
Frequency
|
Dual frequency 50 ±20 & 200 ±25 kHz
|
Dual frequency 50 and 200 kHz
|
The synthesized transducer works with dual
frequencies between 28 and 200 kHz
|
26.6 to 242 kHz
|
Broadband (CHIRP)
|
Available
|
N/A
|
N/A
|
Available 2 ch
|
Range Scale
|
Max. 1,200 m
|
Max. 1,200 m
|
Max. 3,000 m
|
Max. 3,000 m
|
Output Power
|
1 kW
|
1 kW
|
3 kW
|
2 kW/3 kW
|
ENVIRONMENT
|
Temperature
|
-15˚C to +55˚C
|
Waterproofing
|
IP55
|
IP20
|
IP20
|
IP22
|
POWER SUPPLY
|
|
12-24 VDC
|
12-24 VDC
|
30 W, 2.8-1.4 A
|
12 W, 1.1-0.4 A
|
30 W, 3.5 A
|
43.1 W, 3.2-1.9 A
|
TRANSDUCERS
(Specify when ordering)
|
|
1 kW
Broadband transducers by AIRMAR
42-65 kHz (low), 130-210 kHz (high)
CM265LH, B265LH (with temperature sensor)
CM275LHW, B275LHW
|
600 W
50/200 kHz:
520-5PSD (Plastic, thru-hull), 520-5MSD (Bronze, thru-hull),
525STID-MSD (Bronze, thru-hull with speed/temp sensor),
525STID-PWD (Plastic, transom with speed/temp sensor)
1 kW (Optional Matching Box,
MB1100 may be required)
50/200 kHz: 50/200-1T, 50/200-12M
|
1/2/3 kW
28 kHz: 28F-8, 28BL-6HR, 28BL-12HR
38 kHz: 38BL-9HR, 38BL-15HR
50 kHz: 50B-6/6B, 50B-9B, 50BL-12HR, 50BL-24HR
68 kHz: 68F-8H, 68F-30H
82 kHz: 82B-35R
88 kHz: 88B-8, 88B-10, 88F-126H
107 kHz: 100B-10R
150 kHz: 150B-12H
200 kHz: 200B-5S, 200B-8/8B, 200B-12H
50/200 kHz: 50/200-1T
|
2 kW Dual-Band CHIRP
PM111LH, PM111LHW, R109LH, R109LHW, R111LH
2/3 kW Dual-Band CHIRP
CM599LH, CM599LHW, CM599LM, R509LH, R509LHW, R509LM, R599LH,
R599LM
2 kW Single-Band CW
28BL-6HR, 38BL-9HR, 50BL-12HR, 82B-35R, 88B-10, 200B-8/8B
3 kW Single-Band CW
28BL-12HR, 38BL-15HR, 50BL-24HR, 68F-30H, 100B-10R, 150B-12H
5 kW Single-Band CW*
28F-38M**, 50F-38**, 88F-126H, 200B-12H
10 kW Single-Band CW*
28F-72**, 50F-70**
*Rated power of these transducer is 5/10 kW, but actual
output power from DI-FFAMP is 3 kW.
**Booster Box BT-5 is needed for these transducers.
|
Note: DI-FFAMP Requires connection to the
NavNet TZtouch3 Internal Fish Finder.
NavNet Network Multi Beam Sonar
|
MODEL: DFF-3D
|
TRANSCEIVER & DISPLAY
|
Display Modes
|
Cross Section, Triple/Single Beam Sounder, Side Scan, 3D
Sounder History
|
Frequency
|
165 kHz
|
Beam Angle
|
60° Port/Stbd, 120˚ total
|
Detection Range
|
200 m* (Side beam best performance)
300 m* (Main beam directly under boat)
* Depending on bottom type and water conditions.
|
Range Scale
|
5-1,200 m
|
INTERFACE
|
LAN
|
1 port, Ethernet 10/100Base-TX
|
External KP
|
1 port (optional external KP kit required)
|
ENVIRONMENT
|
Temperature
|
-15°C to +55°C
|
Waterproofing
|
IP55
|
POWER SUPPLY
|
|
12-24 VDC, 1.4-0.7 A
|
TRANSDUCER
|
|
165T-B54 or 165T-SS54 (thru-hull mount), or 165T-TM54 (transom
mount)
Combo Transducers: 165T-50/200-SS260 (thru-hull mount),
165T-265LH-PM488 (pocket mount), or 165T-50/200-TM260 (transom
mount)
|
Technical Info
Interfacing and Installation
|