Raymarine Raystar RS150 GPS E70310 (OLD Raystar 130 )
RS150 GPS Sensor
The RS150 GPS is a high performance, 72-channel, remotely mounted GPS sensor
for Raymarine navigation systems. The RS150 offers fast 10Hz position updates
and enhanced accuracy. The RS150 is also a GNSS receiver and supports the
GLONASS global navigation satellite system
RS150 Key Features
- 72-channel GPS receiver
- Fast 10Hz position updates
- Satellite differential GPS-compatible. Space-Based Augmentation System (SBAS)
enabled with WASS, EGNOS, MSAS and GAGAN support
- A GNSS receiver with GLONASS compatibility
- Low power consumption: 30mA (1 LEN)
- SeaTalkng and NMEA2000 compatible (using a device net adapter cable)
- Designed for low profile surface mounting or optional pole mounting
| Display |
Do you require an external GPS antenna or GPS sensor? |
| aSeries, cSeries, eSeries and eS Series MFD with integral GPS
|
Typically, you do not require an external GPS because your Multifunction
Display incorporates an integrated GPS receiver.
However, there are some circumstances when you may require an external GPS
antenna or sensor—for example within a steel wheelhouse where the
Multifunction Display will not receive GPS signals.
The optional GA150 remote GPS antenna and the RS150 GPS can be used with the
following multifunction displays when an external sensor is required:
aSeries a95 / a97 / a98 / a125 / a127 / a128
eS Series eS97 / eS98 / eS127 / eS128
The following multifunction displays can use the RS150 when an external GPS
antenna is required:
aSeries a65 /a67 a67/ a75/ a77 /a78
eS Series eS75 /eS78
All legacy c Series and e Series |
| gS Series MFD |
gS Series systems require a Raymarine RS150 GPS external sensor as part
of the network. |
| Legacy E Series Widescreen (E90W, E120W, E140W) |
The E Series Widescreen displays do not have an integrated GPS and can
use the RS150 connected via a SeaTalkngbackbone. |
| Legacy C Series Classic (C80, C120) E Series
Classic (E80, E120) |
Raymarine Classic Multifunction Displays require a SeaTalk1 to SeaTalkng
converter to connect an RS150.
|
| Product Number |
E70310 |
| Nominal supply voltage |
12V D.C. Powered by N2K bus |
| Operating voltage range |
8 - 32V DC |
| Power consumption |
30 mA max (NMEA LEN = 1) |
| Operating temperature |
-13ºF to 131ºF (-25ºC to +55ºC) |
| Relative humidity |
max 93% |
| Waterproof |
IPx6/7 |
| Supported connection protocols |
SeaTalkng: NMEA 2000 (certified) (via DeviceNet adaptor) |
| Sensitivity |
High sensitivity - acquisition down to -163dBm |
| No. of channels |
72 |
| Positioning System |
GPS & GLONASS |
| Satellite Differential Type |
WAAS (United States); EGNOS (Europe); MSAS (Japan); GAGAN (India) |
| Differential acquisition |
Automatic |
| Position accuracy (95%) |
<15m |
| Position accuracy with SDGPS (95%) |
<5m |
| Speed accuracy (95%) |
<0.3kt |
| Time to first fix from cold start |
<2 minutes (< 45 seconds typical) |
| Time to first fix from hot start |
< 8 seconds -72 hour hold up battery allows for hot start |
| Geodetic Datum |
WGS84 |
| Mounting |
Surface/rail/pole |
|
WARNING:
This product can expose you to chemicals including Di-n-hexyl Phthalate (DnHP)
which is known to the State of California to cause reproductive harm, and
Vinyl Chloride which is known to the State of California to cause cancer. For
more information go to 
