NAVPOD GP205032 SystemPod
Model: GP2050-32
- SailPod Pre-Cut for Garmin
GPSMAP 8410xsv/8610xsv for 12? wide guard
SailPods are for mounting a single Radar or Chartplotter at the helm. Navigation
at your finger tips? "Where you need it, when you need it." SailPods are the
smart solution for mounting your Radar or Chartplotter at the helm where you can
easily operate and clearly see the fine details of the screen. NavPods have a
high gloss finish, giving you a clean mounting solution while concealing
unsightly wires. Nickel Chrome-Plated tamper-resistant screws provide a little
bling and a lot of security. Designed with a double gasket waterproof seal,
NavPods protect your electronics from the harshest of wet offshore boating
conditions. A SailPod is best mounted on a Single Bend AngleGuard, or on the
angled section of a Double Bend Angle Guard with an InstrumentPod mounted above
it on the straight section.
Structural Rigidity — The Gen3 enhancements now include a thicker gauge acrylic
capped ABS material that improves strength and provides better structural
rigidity. This thicker material allows for a larger waterproof seal. The better
the structural rigidity, the less flexing when tightening and more uniform
pressure on the seal. The excellent UV stability of the acrylic is combined with
the durability of the ABS. The acrylic cap protects the ABS from UV and its
potentially damaging effects on plastic.
Waterproof Seal — All SailPods are manufactured with a double gasket system
providing an excellent watertight seal. This seal provides the best protection
of your Marine Electronics. SailPods are made to withstand the harshest wet
offshore boating conditions. Gen3 enhancements include a thicker external
silicone gasket with improved flush fit. The internal Poron Microcell
Polyurethane gasket is now 50% thicker and is not subject to "compression set"
like many rubber compounds. This is important when you need to open the SailPod
in the future in order to service your electronics. The gasket will continue to
do its job.
Nickel Chrome-Plated Stainless Steel — We use all 316 stainless steel hardware
that is supplied with each NavPod. Large round-head tamper-resistant screws have
deeper sockets for the NavPod wrench for better holding ability when tightening
than screws used on our Traditional Series NavPod. The Nickel Chrome-Plated
Stainless Steel tamper-resistant screws provide security combined with a little
style!
Commitment to Quality — We stand behind our commitment by offering a 10-year
warranty on all new Gen3 NavPods.
Specifications
Overall |
Height |
11 |
Width |
15.125 |
Depth |
6.375 |
Usable Face |
Height |
8.75 |
Width |
12.75 |
Depth |
5 |
Max Cutout |
Height |
9 |
Width |
13 |