|
Max Flow
|
17 GPM
|
60 LPM
|
|
Max Head
|
27 FT
|
6 M
|
|
Power
|
.125 HP
|
.093 KW
|
|
Electrical
|
115V 50/60HZ
|
|
Submersible
|
Non-Submersible
|
|
|
60HZ
|
50HZ
|
|
Inlet
|
1"FPT
|
|
Outlet
|
1/2"MPT
|
|
Wet End
|
Polypropylene (Front and Rear Housing, Impeller), Buna N (O-Ring), Ceramic
(Shaft, Thrust Washers), Ceramic Magnet
|
|
Available with 750 Priming Chamber
|
AC-5C-MD
Curve
AC-5C-MD
Pump Manual
Options:
O-Ring: Buna N, Viton, Teflon Encapsulated Viton, or Ethylene Propylene
Shaft: Ceramic or 316 Stainless Steel
Imp. Bushing: Carbon or Mica Teflon
Flanges Available
750 Priming Chamber Information
Reference Information
Dimensional
Drawing AC-5C-MD 115V
Dimensional
Drawing AC-5C-MD 230V
Dimensional
Drawing AC-5C-MD 115V DWG (130 KB)
Dimensional
Drawing AC-5C-MD 230V DWG (129 KB)
3D
Drawings Available In DWG, IPT, and STEP Format
March Pump's industrial AC-5C-MD is an American seal-less centrifugal magnetic
drive pump ideal for applications such as chemical recirculation, chemical
transfer, and scrubber systems. It is capable of generating a maximum flow of 17
gallons per minute at 1 feet, and its maximum head is 27 Feet (or around 11PSI).
The standard wet end (the materials that come into contact with the solution) is
composed of Polypropylene, Buna N, Ceramic, and Ceramic Magnet. The inlet
connection is 1 inch female pipe thread, and the outlet is 0.5 inch male pipe
thread. The standard motor is a 1 Phase 115V or 230V 0.125 Horsepower fan cooled
motor, which can be run on either 50 or 60 hertz (there are performance
differences between the hertz options). The maximum internal pressure the pump
can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit
or
87 Celsius
. The March AC-5C-MD centrifugal magnetic drive pump is capable
of handling mildly or highly corrosive chemicals, acids, and solvents. To
determine if the March AC-5C-MD is suitable for your application, please contact
March Pump.
Perfect for Applications Including
Applications for the AC-5C-MD Magnetic Drive Pump include chemical
recirculation, refrigerators, small scrubbers, detergent mixers, computer
cooling, carbon arc furnace cooling, and marine air conditioners.
Great for Chemicals
Including
The AC-5C-MD has pumped
has
pumped Acetic Acid, Acetone, Ammonium Sulfate, Citric Acid, Ethylene Glycol,
Ferric Sulfate, Hydrogen Peroxide, Potassium Hydroxide, Sodium Chloride, Fresh
Water, Salt Water, and many more chemicals. The AC-5C-MD may have been modified
to handle these chemicals. Please contact March Pump to review your application
before using the AC-5C-MD for any of the above listed chemicals.
Chemical
Resistance Chart
Warranty
March pumps are guaranteed against
defects in materials or workmanship for one year from the date of manufacture.
Warranty will be extended for up to one year from the date of purchase, provided
that the warranty card is returned to the factory within 10 days of the purchase
date.
In all events, liability is limited to the purchase price and to the replacement
or repair of any pump or parts defective in materials or workmanship. All pumps
for which a warranty claim is made must be returned to the factory with shipping
costs prepaid. This warranty is void if the pump has been subjected to misuse or
negligence. This warranty applies only to pumps used to pump water. For
applications with all other solutions, contact the factory for verification of
warranty terms before the pump is installed.
WARNING:
This product can expose you to chemicals including Di-n-hexyl Phthalate (DnHP)
which is known to the State of California to cause reproductive harm, and
Vinyl Chloride which is known to the State of California to cause cancer. For
more information go to 
