Cylinder Ram Size Chart
Use the table below to determine which Raymarine hydraulic pump is
appropriately sized for your steering ram.
Important Note: The information given in this table should be used
for guidance only. If you are in any doubt as to the correct drive unit contact
Raymarine's Customer Support Team or consult with an authorized Raymarine dealer
for further application advice.
Manufacturer and Cylinder Ram Model Number |
Volume (cc) |
Volume (cu in) |
Raymarine Pump |
Special Notes |
BCS |
MT50 |
142 |
8.7 |
Type 1 |
See Note 1 |
MT80 |
195 |
12 |
Type 1/Type 2 |
See Note 1 |
MType 105 |
261 |
15.9 |
Type 2/Type 3 |
See Note 1 |
MType 215 |
530 |
32.3 |
CR2 |
- |
MType 300 |
750 |
45.8 |
CR2 |
- |
MType 360 |
917 |
55.9 |
CR2 |
- |
MT450 |
1266 |
77.2 |
- |
See Note 2 |
MT550 |
1388 |
84.7 |
- |
See Note 2 |
MT800 |
1984 |
121 |
- |
See Note 2 |
MType 1160 |
2884 |
176 |
- |
See Note 2 |
MType 1600 |
3856 |
235.2 |
- |
See Note 2 |
HY-DRIVE |
310 |
162 |
9.9 |
Type 1/Type 2 |
See Note 1 |
312 |
105 |
6.4 |
Type 1 |
See Note 1 |
313 |
195 |
11.9 |
Type 1/Type 2 |
See Note 1 |
314 |
310 |
18.9 |
Type 2/Type 3 |
See Note 1 |
316 |
144 |
8.8 |
Type 1 |
See Note 1 |
HYNAUTIC |
K1 |
198 |
12.1 |
Type 1/Type 2 |
See Note 1 |
K2 |
288 |
17.6 |
Type 2/Type 3 |
See Note 1 |
K3 |
379 |
23.1 |
Type 3/CR1 |
See Note 1 |
K4 |
500 |
30.5 |
CR1/CR2 |
See Note 1 |
K10 |
123 |
7.5 |
Type 1 |
See Note 1 |
K11 |
180 |
11.8 |
Type 1/Type 2 |
See Note 1 |
K12 |
141 |
8.6 |
Type 1 |
See Note 1 |
K13 |
180 |
11 |
Type 1/Type2 |
See Note 1 |
K14 |
141 |
8.6 |
Type 1 |
See Note 1 |
K16 |
115 |
7 |
Type 1 |
See Note 1 |
K17 |
147 |
9 |
Type 1 |
See Note 1 |
K18 |
136 |
8.3 |
Type 1 |
See Note 1 |
K19 |
148 |
9 |
Type 1 |
See Note 1 |
K20 |
136 |
8.3 |
Type 1 |
See Note 1 |
K22 |
218 |
13.3 |
Type 1/Type 2 |
See Note 1 |
K24 |
109 |
6.6 |
Type 1 |
See Note 1 |
K25 |
218 |
13.3 |
Type 1/Type 2 |
See Note 1 |
K26 |
262 |
16 |
Type 2/Type 3 |
See Note 1 |
K27 |
218 |
13.3 |
Type 1/Type 2 |
See Note 1 |
K28 |
262 |
16 |
Type 2/Type 3 |
See Note 1 |
K29 |
262 |
16 |
Type 2/Type 3 |
See Note 1 |
K31 |
418 |
25.5 |
Type 3/CR1 |
See Note 1 |
K32 |
328 |
20 |
Type 2/Type 3 |
See Note 1 |
K33 |
377 |
23 |
Type 3/CR1 |
See Note 1 |
K51 |
167 |
10.2 |
Type 1/Type 2 |
See Note 1 |
KOBELT |
Model 7040 |
B7.5 |
180 |
11 |
Type 1/Type 2 |
See Note 1 |
B5.5 |
131 |
8 |
Type 1 |
See Note 1 |
B10 |
239 |
14.6 |
Type 2 |
- |
Model 7050 |
B7.5 |
333 |
20.3 |
Type 2/Type 3 |
See Note 1 |
B10 |
442 |
27 |
Type 3/CR1 |
See Note 1 |
B12 |
531 |
32.4 |
CR2 |
- |
Model 7080 |
B7.5 |
718 |
43.8 |
CR2 |
- |
B12 |
1149 |
70.1 |
CR2 |
- |
Model 7094 |
U12 |
4326 |
264 |
- |
See Note 2 |
U16 |
5768 |
352 |
- |
See Note 2 |
U20 |
7210 |
440 |
- |
See Note 2 |
U24 |
8652 |
528 |
- |
See Note 2 |
U30 |
10815 |
660 |
- |
See Note 2 |
Model 7096 |
U16 |
12979 |
729 |
- |
See Note 2 |
U20 |
16223 |
990 |
- |
See Note 2 |
U24 |
19468 |
1188 |
- |
See Note 2 |
U30 |
24318 |
1484 |
- |
See Note 2 |
U36 |
29185 |
1781 |
- |
See Note 2 |
LS (POMPES) |
Outboard Cylinder |
28ST HB/HBR |
141.6 |
8.64 |
Type 1 |
See Note 1 |
VHM228 |
106 |
6.4 |
Type 1 |
See Note 1 |
VHM232 |
112 |
6.8 |
Type 1 |
See Note 1 |
Inboard Cylinder |
VHM45 DT |
240 |
14.6 |
Type 2 |
- |
VHM45.228 |
268 |
16.3 |
Type 2/Type3 |
See Note 1 |
VHM60 DT |
505 |
30.8 |
CR2 |
- |
VHM28 DTP |
69.2 |
4.2 |
- |
See Note 2 |
VHM32 DTP |
120.5 |
7.35 |
Type 1 |
See Note 1 |
VHM40 DTP |
191 |
11.6 |
Type 1/Type 2 |
See Note 1 |
VHM40.254 |
239 |
14.5 |
Type 2 |
- |
VHM50 DTP |
352 |
21.5 |
Type 3/CR1 |
See Note 1 |
VHM50.300 |
464 |
28.3 |
CR1 |
- |
VHM60.300 |
664 |
40.5 |
CR2 |
- |
VHM80 DT |
1167 |
71.2 |
CR2 |
- |
VHM90 DT |
1567 |
95.6 |
- |
See Note 2 |
VHM110 DT |
3076 |
187.7 |
- |
See Note 2 |
VHM120 DT |
3798 |
2311.8 |
- |
See Note 2 |
Double Cylinder System |
VHM32 T |
242 |
14.7 |
Type 2 |
- |
VHM40 T |
378 |
23 |
Type 3/CR1 |
See Note 1 |
MARCON |
MC10 |
118 |
7.2 |
Type 1 |
See Note 1 |
MC12 |
152 |
9.3 |
Type 1 |
See Note 1 |
MC14 |
118 |
7.2 |
Type 1 |
See Note 1 |
MC16 |
152 |
9.3 |
Type 1 |
See Note 1 |
MC18 |
118 |
7.2 |
Type 1 |
See Note 1 |
MC20 |
152 |
9.3 |
Type 1 |
See Note 1 |
MC22 |
118 |
7.2 |
Type 1 |
See Note 1 |
MC24 |
152 |
9.3 |
Type 1 |
See Note 1 |
MC40 |
152 |
9.3 |
Type 1 |
See Note 1 |
MC41 |
152 |
9.3 |
Type 1 |
See Note 1 |
MC42 |
197 |
12 |
Type 1/Type 2 |
See Note 1 |
MC43 |
197 |
12 |
Type 1/Type 2 |
See Note 1 |
MC44 |
152 |
9.3 |
Type 1 |
See Note 1 |
MC46 |
197 |
12 |
Type 1/Type 2 |
See Note 1 |
MC60 |
225 |
13.7 |
Type 1/Type 2 |
See Note 1 |
MC62 |
288 |
17.6 |
Type 2/Type 3 |
See Note 1 |
MC64 |
225 |
13.7 |
Type 1/Type 2 |
See Note 1 |
MC66 |
288 |
17.6 |
Type 2/Type 3 |
See Note 1 |
MC50B |
121 |
7.4 |
Type 1 |
See Note 1 |
MAROL |
MRB-30 |
75 |
4.6 |
ST5 |
- |
MRB-50 |
108 |
6.6 |
Type 1 |
See Note 1 |
MRB-63 |
154 |
9.4 |
Type 1 |
See Note 1 |
MRB-80 |
395 |
24.1 |
Type3/CR1 |
See Note 1 |
MORSE |
HS3000 (303932) |
107 |
6.5 |
Type 1 |
See Note 1 |
HS4000 (303942) |
188 |
11.5 |
Type 1/Type 2 |
See Note 1 |
HS5000 (308610) |
222 |
13.6 |
Type 1/Type 2 |
See Note 1 |
SEIPEM |
CD101 |
170 |
10.4 |
Type 1/Type 2 |
See Note 1 |
S151 |
320 |
19.5 |
Type 2/Type 3 |
See Note 1 |
S221 |
440 |
26.8 |
Type 3/CR1 |
See Note 1 |
S301 |
530 |
32.3 |
CR2 |
- |
S501 |
540 |
32.9 |
CR2 |
- |
S701 |
1000 |
61 |
CR2 |
- |
S1001 |
1680 |
102.5 |
- |
See Note 2 |
S1501 |
2700 |
164.7 |
- |
See Note 2 |
CV31 |
56 |
3.4 |
- |
See Note 2 |
CV50 |
75 |
4.6 |
Type 1 |
- |
CV51 |
81 |
4.9 |
Type 1 |
- |
CV75 |
109 |
6.6 |
Type 1 |
See Note 1 |
CV76 |
118 |
7.2 |
Type 1 |
See Note 1 |
SERVI |
MA40 |
120 |
7.3 |
Type 1 |
See Note 1 |
MA60 |
141 |
8.6 |
Type 1 |
See Note 1 |
MA120 |
294 |
17.9 |
Type 2/Type 3 |
See Note 1 |
MA200 |
500 |
30.5 |
CR1/CR2 |
See Note 1 |
MA300 |
750 |
45.7 |
CR2 |
See Note 1 |
MA500 |
1270 |
77.5 |
- |
See Note 1 |
SLEIPNER |
LS450 |
90 |
5.5 |
ST5 |
- |
LS451 |
152 |
9.3 |
Type 1 |
See Note 1 |
LC452 |
129 |
7.9 |
Type 1 |
See Note 1 |
LC453 |
240 |
14.6 |
Type 2 |
- |
LC454 |
268 |
16.3 |
Type 2/Type 3 |
See Note 1 |
LC455 |
505 |
30.8 |
CR2 |
- |
LC456 |
646 |
39.4 |
CR2 |
- |
LC457 |
750 |
45.8 |
CR2 |
- |
LC458 |
1167 |
71.2 |
CR@ |
- |
LC459 |
1567 |
95.6 |
- |
See Note 2 |
LC460 |
3076 |
187.6 |
- |
See Note 2 |
LC461 |
3798 |
231.7 |
- |
See Note 2 |
SP30 (71030) |
68 |
4.2 |
- |
See Note 2 |
SP60 (71060) |
125 |
7.6 |
Type 1 |
See Note 1 |
SP90 (71090) |
215 |
13 |
Type 1/Type 2 |
See Note 1 |
TELEFLEX/SEASTAR |
BA125-7 |
118 |
7.2 |
Type 1 |
See Note 1 |
BA135-7 |
139 |
8.5 |
Type 1 |
See Note 1 |
BA137-7 |
139 |
8.5 |
Type 1 |
See Note 1 |
BA150-7 |
167 |
10.2 |
Type 1/Type 2 |
See Note 1 |
BA175-7 |
216 |
13.2 |
Type 1/Type 2 |
See Note 1 |
BA200-7 |
310 |
18.9 |
Type 2/Type 3 |
See Note 1 |
BA200-11 |
486 |
18.9 |
CR1 |
See Note 1 |
Sterndrive Cylinder |
125-8EM |
161 |
9.8 |
Type 1/Type 2 |
See Note 1 |
BA135-8EM |
155 |
9.4 |
Type 1 |
See Note 1 |
BA150-7EM |
168 |
10.2 |
Type 1/Type 2 |
See Note 1 |
TENFJORD |
JR1.10 |
100 |
6.1 |
Type 1 |
See Note 1 |
JR1.20 |
210 |
12.8 |
Type 1/Type 2 |
See Note 1 |
JR1.25 |
214 |
13 |
Type 1/Type 2 |
See Note 1 |
JR1.30 |
340 |
20.7 |
Type 2/Type 3 |
See Note 1 |
JR1.35 |
367 |
22.4 |
Type 3/CR1 |
See Note 1 |
JR1.50 |
565 |
34.5 |
CR2 |
- |
JR1.60 |
540 |
32.9 |
CR2 |
- |
JR1.100 |
1174 |
71.6 |
CR2 |
- |
VETUS |
MType 30 |
67 |
4.1 |
Type 1 |
See Note 2 |
MT45 |
152 |
9.3 |
Type 1 |
See Note 1 |
MT52 |
104 |
6.3 |
Type 1 |
See Note 1 |
MT65 |
152 |
9.3 |
Type 1 |
See Note 1 |
MT72 |
146 |
8.9 |
Type 1/ Type 2 |
See Note 1 |
MT80 |
190 |
11.6 |
Type 2/Type 3 |
See Note 1 |
MType 105 |
261 |
16 |
Type 2/Type 3 |
See Note 1 |
MType 110 |
275 |
16.8 |
Type 2/Type 3 |
See Note 1 |
MType 125 |
253 |
15.5 |
Type 3 |
- |
MType 140 |
350 |
21.3 |
Type 3/CR1 |
See Note 1 |
MType 175 |
356 |
21.7 |
CR2 |
- |
MType 215 |
532 |
32 |
CR1/CR2 |
See Note 1 |
MType 225 |
500 |
30.5 |
CR2 |
- |
MType 340 |
750 |
45.8 |
CR2 |
- |
MT450 |
1000 |
61 |
- |
|
MT600 |
1319 |
80.5 |
- |
See Note 2 |
MT900 |
1978 |
120.7 |
- |
See Note 2 |
MType 1200 |
2638 |
161 |
Type 1 |
See Note 2 |
OB35 |
106 |
6.44 |
Type 1 |
See Note 1 |
OB85 |
170 |
10.35 |
|
See Note 1 |
WAGNER |
N-65 |
98 |
6 |
ST5 |
- |
N-85 |
128 |
7.8 |
Type 1 |
See Note 1 |
N40-120 |
127 |
7.7 |
Type 1 |
See Note 1 |
N40-190 |
200 |
12.2 |
Type 1/Type 2 |
See Note 1 |
N50-190 |
314 |
19.1 |
Type 2/Type 3 |
See Note 1 |
N50-300 |
495 |
30.2 |
CR1 |
- |
N80-190 |
802 |
49 |
CR2 |
- |
N80-300 |
1267 |
77.3 |
- |
See Note 2 |
N-175-750 |
241 |
14.7 |
Type 2 |
- |
N-175-1000 |
321 |
19.6 |
Type 2/Type 3 |
See Note 1 |
N-250-800 |
541 |
33 |
CR2 |
- |
N-250-1000 |
680 |
41.5 |
CR2 |
- |
N-250-1300 |
878 |
53.6 |
CR2 |
- |
N-350-1200 |
1541 |
94 |
- |
See Note 2 |
T-2 |
162 |
9.9 |
Type 1/Type 2 |
See Note 1 |
T-3 |
377 |
23 |
Type 3/CR1 |
See Note 1 |
T-4 |
511 |
31.2 |
CR2 |
- |
T-5 |
685 |
41.8 |
CR2 |
- |
T-10 |
893 |
54.5 |
CR2 |
- |
T-11 |
893 |
54.5 |
CR2 |
- |
T-12 |
1257 |
76.7 |
- |
See Note 2 |
T-12B |
1508 |
92 |
- |
See Note 2 |
T-13 |
1257 |
76.7 |
- |
See Note 2 |
T-13B |
1508 |
92 |
- |
See Note 2 |
WHITLOCK SQUADRON |
Inboard Cylinder |
SRK222 |
115.6 |
7.05 |
Type 1 |
See Note 1 |
SRK173 |
173 |
10.5 |
Type 1/Type 2 |
See Note 1 |
SRK116 |
222 |
13.47 |
Type 1/Type 2 |
See Note 1 |
Outboard Cylinder |
SOB200 |
132.11 |
8.05 |
Type 1 |
See Note 1 |
SOB200 |
163.24 |
9.97 |
Type 1/Type 2 |
See Note 1 |
SOB168 |
168 |
10.25 |
Type 1/Type 2 |
See Note 1 |
Sterndrive Cylinder |
SSD133(B) |
132.11 |
8.05 |
Type 1 |
See Note 1 |
SSD135(UB) |
132.11 |
8.05 |
Type 1 |
See Note 1 |
WILLIS-RIDLEY |
T.50 |
136 |
8.3 |
Type 1 |
See Note 1 |
T.100 |
283 |
17.3 |
Type 2/Type 3 |
See Note 1 |
T.160 |
354 |
21.6 |
Type 3/CR1 |
See Note 1 |
W.1(1.11/16) |
403 |
24.6 |
Type 3/CR1 |
See Note 1 |
W.1(1.7/8) |
508 |
31 |
CR2 |
- |
W.2(2.3/8) |
800 |
48.8 |
CR2 |
- |
W.2(2.7/8) |
1171 |
71.4 |
CR2 |
- |
W.3(75) |
1706 |
104 |
- |
See Note 2 |
W.3(85) |
2181 |
133 |
- |
See Note 2 |
W.3(95) |
2722 |
166 |
- |
See Note 2 |
R.2.5/9 |
543 |
33.13 |
CR2 |
- |
R.2.5/12 |
724 |
44.18 |
CR2 |
- |
R.3.25/8 |
927 |
56.5 |
CR2 |
- |
R.3.25/11.25 |
1304 |
79.5 |
- |
See Note 2 |
R.4/11.25 |
1984 |
121 |
- |
See Note 2 |
R.5/11.5 |
2952 |
180 |
- |
See Note 2 |
R.5/15.5 |
3968 |
242 |
- |
See Note 2 |
2R.3.25/11.25 |
2608 |
159 |
- |
See Note 2 |
Selection Chart Notes
The recommended Raymarine pump in the table above has been determined by
cylinder displacement alone and should result in a nominal hardover to hardover
time of 10 secs. The formula below can be used to determine the hardover time:
Hardover Time = (Ram Capacity) X 60 (Peak Flow Rate)
Note 1: Where the choice of two or more pumps are indicated the type,
displacement and steering characteristics of the vessel should be considered. By
choosing the larger pump with an increased flow rate a faster hardover time can
be achieved, which on some vessels will result in improved Autopilot helm
response and course keeping.
Note 2: The ram indicated is outside the Raymarine range of pumps.
The information given in this document should be used for guidance only, if
you are in any doubt as to the correct drive unit contact Raymarine's Customer
Support Team for further application advice.