| 
|
Maxwell RC12-10 Rope/Chain Windlass, 3/8" Chain & 3/4" Rope with Capstan
RC Rope/Chain Series
Maxwell's all new RC series windlasses proudly follow in the highly
successful footsteps of the Freedom, Liberty and HRC fully automatic rope/chain
anchor winches. RC10 and RC8 are available in both capstan and low profile
versions. RC6 is available in low profile version only.
The all new RC12 Series incorporates Maxwell s latest stylish innovation in
automatic rope/chain technology. Retaining the classic open design styling more
appropriate on larger boats, the RC12 Series represents the next generation of
rope/chain windlass evolution in every respect.
Every Maxwell automatic rope/chain windlass is available
with all the necessary components for fully automatic dual
direction control in a competitively priced package.
In the Box:
Windlass
Circuit breaker/isolator panel
Dual direction solenoid pack
Up/down controls
Emergency crank/clutch release handle
|
|
Maxwells revolutionary new chainwheel.
Maxwell once again leads the market in innovative thinking with the
introduction of their latest Wave Design chainwheel. This patented rope/chain
wheel incorporates two unique design concepts that greatly improve the handling
and control of the rope/chain spliced rode. The outer ribs of the chainwheel are
angled slightly forward ensuring that the rope and the chain are smoothly guided
in the wheel during anchor retrieval.
As the rope pulls into the wheel, the opposite facing inner ribs grip the
rope in an undulating manner, securing the rope more firmly in a 'wave pattern'
action that is far superior to the traditional 'jam cleat' manner of holding the
rope compared to all other products on the market. Not only does this Wave
Design hold the rope more securely, it is also kinder on the rope resulting in
increased longevity of your anchor rode.
Wave Design Chainwheel
Is fitted to all RC Series windlasses, designed for anchor rodes with any
marine grade chain, G4, BBB, Proof Coil and Metric.
Chainwheel s unique Wave Design action
User Manual:
Features
RC6:
- The combined stainless steel and chromed bronze RC6 Series utilises
6mm/7mm (1/4") chain spliced to 12mm (1/2 ) three strand or 8-brait (plait)
rope.
- The RC6 features Maxwell s revolutionary, and patented, new Wave Design chainwheel.
- Providing most of the features of the larger RC8, the RC6 has been
designed with the smaller, trailer boat market in mind.
- The in-line, vertical gearbox and motor means quick and easy
installation by either the boat yard or the DIY aftermarket customer.
- An inexpensive, high performance and great looking windlass; the RC6 is
built for durability and years of trouble free use.
- The RC6 is a Low Profile unit (no optional capstan drum).
RC8:
- The all new stainless steel RC8-6 fully automatic rope/chain windlass is
designed to effortlessly retrieve and deploy 6mm/7mm (1/4 ) chain spliced to
12mm (1/2 ) three strand or 8-brait (plait) rope.
- The larger stainless steel RC88 can be used with 8mm (5/16 ) chain
spliced to 14mm (9/16 ) three strand or 8-plait rope.
- The ingeniously designed rope/chain gypsy (chainwheel) is able to
accommodate a wide range of chain pitch differences within the specified
chain size diameters suitable for use with the RC8 Series.
- A sleek, Low Profile version and a MAX-grip capstan drum version, with
drum made in chromed bronze, are available.
- Simple two piece installation saves time and money and allows easy
retrofitting without disassembly of the windlass.
- Unique spacer tube design allows installation through virtually any deck
thickness and the multiple mounting positions and self aligning gearbox
ensure optimal location of gearbox and motor in virtually all installation
situations.
- The RC8 features Maxwell s revolutionary, and patented, new Wave Design chainwheel.
- The heavy duty stainless steel pressure arm is designed to effectively
help grasp the rope/chain splice, giving the RC8 an unparalleled level of
performance. In combination with a heavy duty, large wire diameter,
stainless steel pre-loaded spring, the pressure arm always exerts maximum
control pressure.
- The RC8 works just as effectively with all-chain rodes.
- Huge, through deck hawse pipe throat ensures easy entry of the
rope/chain rode into and out of the anchor locker.
- Full disassembly capability of the topworks utilising only the handle
provided and an Allen key.
- Manual override and Free Fall, using the emergency crank/clutch handle
provided.
- Sealed oil bath and marine-grade hard anodised, alloy gearbox provides
maximum output via a precision worm and worm wheel.
RC10:
- The combined stainless steel and chromed bronze RC10 fully automatic
windlass series is designed to effortlessly retrieve and deploy 8mm (5/16 )
and 10mm (3/8 ) short link chain and 14mm and 16mm (5/8 ) three strand or
8-brait (plait) rope.
- A sleek, Low Profile version and a fluted stainless steel capstan drum
version, are available.
- Simple two piece installation saves time and money and allows easy
retrofitting without disassembly of the windlass. Unique spacer tube design
allows installation through virtually any deck thickness and the multiple
mounting positions and self aligning gearbox ensure optimal location of
gearbox and motor in virtually all installation situations.
- Full disassembly capability of the topworks utilising only the handle
provided and an Allen key.
- The RC10 is manufactured from marine-grade 316 stainless steel and
chromed bronze for long term durability. The heavy duty stainless steel
pressure arm, coupled with the unique rope/chain gypsy, is designed to
effectively grasp the splice between rope and chain, giving the RC10 an
unparalleled level of performance.
- In combination with a heavy duty, large wire diameter, stainless steel
pre-loaded spring, the pressure arm pivots on a trouble free bearing,
thereby exerting maximum control pressure on the rode and splice.
- The RC10 works just as effectively with all chain rodes for those who
desire a Low Profile, elegantly styled windlass on their foredeck.
- Huge, through deck hawse pipe throat ensures easy entry of the
rope/chain rode into and out of the anchor locker.
- Cone type clutch/brake mechanism permits manual, Free Fall anchoring.
- Sealed oil bath and marine-grade hard anodised, alloy gearbox provides
maximum output via a precision worm and worm wheel.
RC12:
- The RC12 fully automatic windlass series is designed to effortlessly
retrieve and deploy 10mm (3/8 ) short link chain and 16mm (5/8 ) to 20mm
(3/4 ) three strand or 8-Plait rope (RC12-10) and 12mm/13mm (1/2 ) short
link chain and 20mm (3/4 ) three strand or 8-Plait rope (RC12-12).
- With a maximum pull of 1590 kg (3500 lb), and an anchor retrieval rate
of 15m/min (50ft/min), the RC12-12 is one of the fastest and gruntiest
windlasses in its class.
- A sleek, Low Profile version and a fluted stainless steel capstan drum
version, are available.
- The all new RC12 is packed with patented innovative features combined
with Maxwell s traditionally classic aesthetics, but reflecting the modern
form follows function of the highly successful RC6, RC8 and RC10
series windlasses.
- The elegantly designed deckplate and chainpipe cover are manufactured in
polished marine-grade 316 stainless steel, as are the heavy duty pressure
arm, stripper, chainwheel and fluted capstan drum.
- The huge, through deck hawse pipe throat ensures easy entry of the
rope/chain rode into and out of the anchor locker.
- Double cone-type brake/clutch mechanism permits Free Fall
anchoring. Cone clutches, unlike dog clutches, provide smooth progressive
engagement, ensuring safe and precise operator control.
- The RC12 features Maxwell s revolutionary and patented new Wave Design chainwheel. Refer to RC6 page for more information about this innovative
feature.
- Emergency manual retrieval is made simple and easy with Maxwell s unique
Active Latch Ratchet System operation that prevents backwind of the
windlass during manual hauling of the anchor.
- The Maxwell-designed, all new and innovative black, hard anodised
gearbox provides numerous advantages: - Fast and easy windlass installation
- More corrosion resistant - Easy to maintain and service - Takes up less
room in the anchor locker - 75:1 Ratio (RC12-10) or 100:1 Ratio (RC12-12),
single stage design with less moving parts, for smoother and quieter
operation - Allows for multi-positioning of the gearbox/motor.
SPECIFICATIONS
| Model |
RC6 6mm/7mm - 1/4" |
RC8 6mm/7mm - 1/4" |
RC8 8mm - 5/16" |
RC10 8mm - 5/16" |
RC10 10mm - 3/8" |
RC12 10/11mm - 3/8" |
RC12 12/13mm - 1/2" |
RC12 HD |
| Maximum Pull |
350kg
770lbs |
350kg
770lbs |
600kg
1320lbs |
700kg
1540lbs |
850kg
1870lbs |
1134kg
2500lb |
1590kg
3500lb |
1820kg
4000lb |
| Static Hold |
700kg
1540 lbs |
1200kg
2640 lbs |
1200kg
2640 lbs |
1500kg
3300 lbs |
1500kg
3300 lbs |
2200kg
4840lbs |
2200kg
4840lbs |
2200kg
4840lbs |
| Chain Short Link |
6mm/7mm
1/4" |
6mm/7mm
1/4" |
8mm
5/16" |
8mm
5/16" |
10mm
3/8" |
10mm
3/8" |
12mm/13mm
1/2" |
10mm/13mm
3/8" 1/2" |
Rope Size
(3 strand or 8 plait) |
12mm
1/2" |
12mm
1/2" |
14mm-16mm
9/16"- 5/8" |
14mm-16mm
9/16" - 5/8" |
16mm
5/8" |
16-18mm
5/8-3/4" |
20mm
3/4" |
18-20mm
3/4" |
Chain Speed
(Normal working load) |
24m/min
79ft/min |
28m/min
92ft/min |
32m/min
105ft/min |
24m/min
79ft/min |
24m/min
79ft/min |
24m/min
79ft/min |
15m/min
50ft/min |
12m/min
39ft/min |
Rope Speed
(Normal working load) |
21m/min
69ft/min |
24m/min
79ft/min |
28m/min
92ft/min |
20m/min
65ft/min |
20m/min
65ft/min |
20m/min
65ft/min |
13m/min
43ft/min |
13m/min
43ft/min |
| Power Supply (DC) |
12V or 24V
|
12 or 24V
|
12 or 24V
|
12 or 24V
|
12 or 24V
|
12V or 24V
|
12V or 24V
|
24V
|
| Motor Power |
500W
|
600W
|
1000W
|
1000W
|
1200W
|
1200W
|
1200W
|
2000W
|
| |
|
|
|
|
|
|
|
|
| Net weight DC Low profile version |
8.5kg
18.7lbs |
12.5kg
27.5lbs |
16.5kg
36.3lbs |
19kg
42lbs |
20kg
44lbs |
32kg
71lbs |
32kg
71lbs |
40kg
88lbs |
| Net weight (Hyd - Capstan version |
|
|
|
|
|
26kg
57lb |
26kg
57lbs |
31.5kg
69lbs |
DIMENSIONS
| Model |
RC6 6mm/7mm - 1/4" |
RC8 6mm/7mm - 1/4" |
RC8 8mm - 5/16" |
RC10 8mm - 5/16" |
RC10 10mm - 3/8" |
RC12 10/11mm - 3/8" |
RC12 12/13mm - 1/2" |
RC12 HD |
| A |
196mm
7 3/4" |
210mm
8 5/16" |
210mm
8 5/16" |
230mm
9 1/8" |
230mm
9 1/8" |
293mm
11 5/8" |
293mm
11 5/8" |
293mm
11 5/8" |
| B1 |
80mm
3 1/8" |
83mm
3 5/16" |
83mm
3 5/16" |
89mm
3 1/2" |
89mm
3 1/2" |
128mm
5 1/8" |
128mm
5 1/8" |
128mm
5 1/8" |
| B2 (with Capstan) |
|
146mm
5 3/4" |
146mm
5 3/4" |
168mm
6 5/8" |
168mm
6 5/8" |
233mm
9 1/4" |
233mm
9 1/4" |
233mm
9 1/4" |
| C |
145mm
5 3/4" |
156mm
6 3/16" |
156mm
6 3/16" |
170mm
6 3/4" |
170mm
6 3/4" |
206mm
8 1/8 |
206mm
8 1/8" |
206mm
8 1/8" |
| D (Std deck clearance) |
209mm
8 1/4" |
200mm
7 7/8" |
208mm
8 1/4" |
251mm
10" |
251mm
10" |
210mm
8 3/8"t |
210mm
8 3/8" |
241mm
8 3/8" |
| D (Extra deck clearance) |
|
300mm
12" |
308mm
12 1/8" |
301mm
11 7/8" |
301mm
11 7/8" |
317mm
12 1/2" |
317mm
12 1/2" |
348mm
13 3/4" |
| E |
65mm
2 1/2" |
245mm
9 5/8" |
272mm
10 3/4" |
272mm
10 3/4" |
272mm
10 3/4" |
294mm
11 5/8" |
294mm
11 5/8" |
218mm(hyd)
361mm(dc)
8 5/8"(hyd)
14 1/4"(dc) |
| F |
39mm
1 9/16" |
383mm
15" |
410mm
16 1/4" |
424mm
16 3/4" |
424mm
16 3/4" |
482mm
19" |
482mm
19" |
411mm(hyd)
549mm(dc)
16 1/8"(hyd)
21 5/8"(dc) |
| G (Std deck clearance) |
|
65mm
2 1/2" |
65mm
2 1/2" |
100mm
4" |
100mm
4" |
90mm
3 5/8" |
90mm
3 5/8" |
95mm
3 3/4" |
| G (Extra deck clearance) |
|
165mm
6 1/2" |
165mm
6 1/2" |
150mm
6" |
150mm
6" |
190mm
7 1/2" |
190mm
7 1/2" |
195mm
7 5/8" |
| H |
|
40mm
1 5/8" |
40mm
1 5/8" |
43mm
1 3/4" |
43mm
1 3/4" |
54mm
2 1/4" |
54mm
2 1/4" |
54mm
2 1/4" |
| I |
|
66mm
2 5/8" |
66mm
2 5/8" |
66mm
2 5/8" |
66mm
2 5/8" |
106mm
4 1/4" |
106mm
4 1/4" |
106mm
4 1/4" |
| J |
|
44mm
1 3/4" |
44mm
1 3/4" |
44mm
1 3/4" |
44mm
1 3/4" |
62mm
2 1/2" |
62mm
2 1/2" |
62mm
2 1/2" |
|
|
Important: Maxwell windlasses must be used in conjunction with a
chain stopper or snubbing device to take the load off the windlass
while laying at anchor. The chainstopper and alternative snubbing
system should also be used to secure the anchor in the fully riased
position while under way.
|
**The price is subject to change at anytime without any notice. We
are not responsible for any typographical errors. Any products can be
cancelled from sale at any time.
** All Products sold here are Brand New unless specified
Otherwise and come with Full Manufacturer's Warranty
 WARNING:
This product can expose you to chemicals including Di-n-hexyl Phthalate (DnHP)
which is known to the State of California to cause reproductive harm, and
Vinyl Chloride which is known to the State of California to cause cancer. For
more information go to P65Warnings.ca.gov.
__________________________________________________________________________________________
__________________________________________________________________________________________
Please contact us via email
ask@wmjmarine.com or Call us at
__________________________________________________________________________________________
|
Customer Rating
Top Rated |
We
offer online shipment tracking
  |
 |
256-bit Encryption Shopping Cart
All personal information
submitted is encrypted and 100% secure |
__________________________________________________________________________________________
__________________________________________________________________________________________
Recommended Site:
WMJ Marine at Facebook |
WMJ Marine at
Linkedin | WMJ Marine at
Twitter |
Marine Electronics Store
Thank you for visiting WMJ marine for your
Boating Equipment and
Marine Electronics |
|
|
|
| Compatible Accessories
Maxwell AA320 Hand Held Control
Maxwell AA342 Hand Held Dual Control
Maxwell AA560 Panel Mount Windlass Controller & Rode Counter
Maxwell Anchor Swivel Shackle Stainless Steel, 10-12mm, 1500kg , P104371
Maxwell Anchor Swivel Shackle Stainless Steel, 6-8mm, 750kg , P104370
Maxwell Auto Anchor AA150 Chain/Rope Chain Counter Kit
Maxwell Breaker/Isolator Panel, P100789
Maxwell Dual Direction Solenoid 12 Volt
Maxwell Dual Direction Solenoid 24 Volt
Maxwell Fixed Bow Roller, Size 1 , P104332
Maxwell Fixed Bow Roller, Size 2 , P104333
Maxwell Fixed Bow Roller with Loop, P104345
Maxwell Footswitch Covered , P19006 or P19007
Maxwell Footswitch Plain (Chrome) , P19001
Maxwell Footswitch, Stainless Steel Cover
Maxwell Hinged Bow Roller, Size 1, P104330
Maxwell Hinged Bow Roller, Size 2, P104331
Maxwell Up & Down Remote, P102938
Maxwell Up/Down Footswitch, Compact, P104809 or P104810
Maxwell Anchor Rode, 20'-3/8" Chain to 200'-5/8" Nylon Brait
Anchor Rollers
Boat Anchors
|
|
