The Isolated series provides voltage conversion as well as input/output
isolation, allowing use of negative ground gear to positive or floating ground
battery systems, or vice versa. Many models may also be used as 12 or 24 volt
stabilizers for highly input voltage sensitive equipment.
Using an Isolated Converter as a voltage stabilizer on 12 or 24 volt systems can
solve conducted noise and interference problems on sensitive DC powered devices
communication, navigation systems, and DC micro-processor based devices.
Features
- Wide range of input
voltage
- Precise output voltage
regulation
- Reverse polarity
- Input fuse/Output fuse
- Total input/output
isolation, pos. or neg. ground
- Current limiting, short
circuit proof output
- Automatic re-setting
thermal shutdown
- High/low input voltage
shutdown
- Polyurethane conformal
coating on PC board
- Power ON light
- Rugged case designed for
high vibration applications
Model |
Input
voltage |
Max Input
Amps |
Output
voltage |
Output Amps |
Case
Size |
Weight |
Intermittent |
Continuous |
Lbs |
Kg |
12-12-12I |
10-16** |
19.2 |
13.6 |
12 |
8 |
C-2 |
6 |
2.7 |
12-24-6I |
10-16** |
19.2 |
24.5 |
6 |
4 |
C-2 |
6 |
2.7 |
12-12-35I |
10-16** |
56 |
13.6 |
35 |
20 |
C-3 |
12 |
5.5 |
12-24-18I |
10-16** |
56 |
24.5 |
18 |
10 |
C-3 |
12 |
5.5 |
48-12-6I |
20-56 |
4.8 |
13.6 |
6 |
6 |
C-1 |
7 |
2.7 |
48-24-3I |
20-56 |
4.8 |
24.5 |
3 |
3 |
C-1 |
7 |
2.7 |
48-12-12I |
20-56 |
9.6 |
13.6 |
12 |
8 |
C-2 |
6 |
2.7 |
48-24-6I |
20-56 |
9.6 |
24.5 |
6 |
4 |
C-2 |
6 |
2.7 |
48-12-18I |
20-56 |
14.4 |
13.6 |
18 |
10 |
C-2 |
8 |
3.6 |
48-24-9I |
20-56 |
14.4 |
24.5 |
9 |
5 |
C-2 |
8 |
3.6 |
48-12-35I |
20-56 |
28 |
13.6 |
35 |
20 |
C-3 |
12 |
5.5 |
48-24-18I |
20-56 |
28 |
24.5 |
18 |
10 |
C-3 |
12 |
5.5 |
**11.5 VDC minimum start-up voltage, then operates @ 10-16 VDC from 1 amp
minimum to full load
Case Size
Case |
Inches |
Centimeters |
H |
W |
D |
H |
W |
D |
C-1 |
4.25 |
5.9 |
7.7 |
10.8 |
15.0 |
19.6 |
C-2 |
4.25 |
5.9 |
14.0 |
10.8 |
15.0 |
35.6 |
C-3 |
6.0 |
6.8 |
16.5 |
15.2 |
17.3 |
41.9 |
Specifications
Output: 13.6
VDC (internally adjustable 12.6 -14.5) or 24.5 VDC (or specify)
Ripple: 150
mV P-P maximum
Regulation: 1%
Line/Load
Duty Cycle Ratings: Intermittent
20 minutes max on time, 20% duty. current limit set at approx. 105% of
intermittent rating. Continuous 24 hours, 100% duty
Idle Current: Less
than 100 mA (including power ON light )
Operating Temp: 0-50˚
C, Derate Linearly From 100% @ 40˚ C To 50% @ 50˚ C.
Thermal shutdown @ 70˚ C Case Temperature.
Switching Frequency: 40
Khz.
Efficiency: 85%
Typical.
Isolation
Output/Chassis; Input/chassis: 250 VDC
Mechanical
- Anodized aluminum heat
sink case
- Front panel terminal
block
- Heavy duty mounting
flange
- Conformal coated PC
board
Manual
DC Converter