Furuno SC130 Satellite Compass

GNSS-powered high accuracy compass

High precision and accurate heading of 0.25° (SC-130)
Perfect for Radar, ECDIS, AIS, Doppler Sonar and Autopilot

Features

SC-130 features a Tri-sensor antenna that provides a high system accuracy for the heading of your vessel

Provides highly accurate heading data for Autopilot, Radar, ARPA, Scanning Sonar, Current Indicator, Chart Plotter, ECDIS and Autopilot
●0.25° (with SC-130)
Ideal for medium to large vessels navigating in crowded ports and making precise maneuvers, such as berthing.
●0.4° (with SC-70)
Ideal for small to medium boats requiring highly accurate heading .
Utilizes GNSS such as GPS, Galileo and GLONASS for high precision

・SBAS compatible (EGNOS,WAAS, MSAS)
・Provide precise data for SOG, COG, ROT and L/L
・Eliminating the problem of not having enough satellites at hand by using multiple types of satellites
Speed on 3 axis (Bow, stern and longitudinal) for safe navigating and berthing
Type-approved as THD, GPS and ROTI*. Complying with following requirements (For Solas Vessels)

IMO MSC.116(73) •IMO MSC.112(73) •IMO MSC.526(13) •IMO A.694(17)
IMO MSC.97(73) •IMO MSC.191(79) •IMO MSC.302(87) •IEC 60945 Ed.4
IEC 62288 Ed.2 •IEC 61162-1 Ed. 4 •IEC 61162-2 Ed.1 •IEC 61162-450 Ed.1
IEC 61108-1 Ed.2 •ISO 22090-3 Ed.2 •ISO 20672 Ed.1
* requires the RD-50 as a display unit
Easily integrated into the existing shipboard network via Ethernet
Rapid follow-up rate 40°/S

・Twice the IMO high speed craft requirement, 20°/s
Maintenance free and no recurring cost as there are no mechanical parts
Super short starting time - 90 seconds

・Once the power is on, it takes about 90 seconds only to start
(The starting time will slightly differ depending on the equipment)
Easy to retrofit by using existing antenna cabling

・For SC-50/55/60/110/120 (The LAN_CNV option Kit is necessary)
Precision Pitch/Roll data in Analog and Digital formats for vessel stabilization, SONAR, etc.

Specifications

GENERAL

Display	4.3-inch color LCD, 95.04 (W) x 87.12 mm (H)
Heading Accuracy	0.25
Heading Resolution	0.1°,0.01°,0.001° (select from menu)
Follow-up	40°/s
Settling time	90 s approx. (typical)
Position Accuracy	GPS 10m approx. (2DRMS, HDOP<4) DGPS 5m approx. (2DRMS, HDOP<4) WAAS 3m approx. (2DRMS, HDOP<4) MSAS 7m approx. (2DRMS, HDOP<4)
Interface	Number of ports (junction box) IEC61162-2: 1 port (IN: 1,OUT: 1) IEC61162-1: 8 ports (IN: 4,OUT: 8) External beacon input (DATA5 port): RTCM SC-104 V2.3 (RS-485), ITU-R M823 CANbus: 1 port AD-10: 4 ports, for heading output RS-485 : 1 port, for display unit connection LAN (IEC61162-450) :Ethernet, 100Base-TX, RJ45 connecter
Temperature	Antenna Unit : -25°C to +55°C (storage: -25°C to +70°C) Display Unit/ Junction Box : -15°C +55°C
Waterproofing	Antenna Unit : IP56 Display Unit : IP22 (IP35 : option) Processor Unit : IP20 (IP22 : bulkhead mount)
Power Supply	12-24 VDC: 2.1-1.1 A (included Antenna Unit and Display Unit)
Weight	Display Unit : 0.7 kg Junction Box : 2.9 kg Antenna Unit (SC-703) : 2.8 kg

Equipment List

Standard

Antenna Unit SC-1303 x 1
Display unit SC-702 x 1
Junction Box SC-701 x 1
Installation materials

Interconnection Diagram

Display modes

THD mode

- Display the heading (HDG) of the ship

Speed mode

- 3-axis speed of the ship: Bow, Stern and longitudinal
(non-IMO type only)

①　Current selected mode (SPD or THD), integrity status and common satellite
②   Transverse speed at bow position
③   Longitudinal speed
④   Transverse speed at stern position
⑤   Distance travelled

Navigational data screen

- 3-axis speed, as well as the Heading, Rate Of Turn and
Course Over Ground can be Grasped at a glance
(non-IMO type only)

GPS integrity mode

- GNSS (GPS,Galileo,GLONASS*) satellites signal reception
including signal strength and signal to noise Ratio
- SBAS signal status
*Type approved with GPS only