Furuno SC33 Satellite Compass, NMEA2000 (0.4 degree Heading Accuracy) with 6M Cable
Sleek, fast and accurate
The SC33 Satellite Compass provides highly accurate attitude information for
navigation equipment such as Radar, Plotter, Autopilot, Fish Finder and Sonar.
With its compact GNSS antenna and built-in processor, it can be used for a wide
variety of applications on any type of vessel. This all-in-one system delivers
incredibly accurate heading and roll & pitch information as well as heaving
information, GPS position, SOG (Speed Over Ground), COG (Course Over Ground) and
ROT (Rate Of Turn) data.
Employing a two-antenna system with a 3-axis gyro and acceleration sensors,
the SC33 enables high-speed response capability. Advanced digital signal
processing techniques compute accurate heading based on sensor data. NMEA2000
interface is standard for simple installation, while the optional interface unit
IF-NMEASC is available for conventional NMEA0183, AD10 and contact closure.
A new GNSS antenna and advanced parallel
signal processing allows the SC33 to achieve more precise Pitch, Roll and
Heading measurement than conventional models, providing enhanced performance for
all of your connected equipment. Its Micro-C pigtail NMEA2000 cable provides
flexibility to run cables in challenging areas.
Revolutionary 2-antenna and rate sensor system
In order to calculate roll & pitch data, a satellite compass requires two
vectors. The SC33 employs a dual GNSS antenna system that calculates a single
vector while a 3-axis rate gyro and acceleration sensors add the 2nd vector.
This configuration enables the SC33 to calculate highly accurate roll and pitch
data without using a third sensor.
Satellite Accuracy, Unwavering Heading
Heading Accuracy of 0.4°, Strong against multipath,
Multi-GNSS, NMEA2000 certified
Perfect for Radar, TT, AIS, Sonars and Autopilots
Features
-
Heading Accuracy of 0.4°
-
3-AXIS speed monitoring
-
Strong against multipath, High reliability
-
Multi-GNSS with GPS, Galileo, GLONASS, QZSS satellite networks
-
NMEA2000 certified
-
NavNet TZtouch, NavNet TZtouch2 series compatible
-
Works perfectly with TIMEZERO software
-
Free from regular maintenance
Specifications
GENERAL
Frequency |
L1 1575.42 MHz (GPS/Galileo/QZSS), 1602.5625MHz (GLONASS) |
Tracking code |
C/A (GPS/QZSS), E1B (Galileo), 10F (GLONASS) |
Heading Accuracy |
0.4° |
Follow-up |
45°/s |
Settling time |
90 s approx. |
Position Accuracy |
GNSS 5m approx. (2DRMS, HDOP<4)
SBAS 4m approx. (2DRMS, HDOP<4)
WAAS 3m approx. (2DRMS, HDOP<4)
|
Interface |
Port: NMEA2000
Input: 059392/904, 060160/416/928, 061184, 061184, 065240, 126208,
Output: 059392, 060928, 061184, 065280, 126208/464/992/993/996/998,
127250/251/252/257/258, 129025/026/029/033/538/539/540/547,
130310/312/314/316/577/578/816/817/818/819/820/822/823/826,130833/834/842/843845/846/847 |
Temperature |
-25°C to +55°C |
Waterproofing |
IP56 |
Power Supply |
12-24 VDC: 0.4-0.2 (LEN: 11 @9 VDC) |
Technical Info
Interfacing and Installation
|