Raymarine RV-220 Bronze Through Hull Transducer Pack (with 20° deadrise
compensation)
Model: T70319
Designed for inboard or outboard boats, the RV-220 Bronze Through Hull
Transducer System lets you easily identify structures and locate fish with the
life-like clarity of RealVision 3D™ sonar.
The RV-220 system is a 4-channel, Wide Spectrum CHIRP transducer system with
DownVision™, SideVision™, high frequency CHIRP fish targeting and RealVision 3D™
sonar inside. The transducer system has a built-in attitude and heading
reference system (AHRS) that stabilizes the sonar imagery, automatically
compensating for vessel motion. You’ll enjoy crystal-clear imagery in waves,
swells, and while maneuvering. The RV-220 system also has a built-in fast
response water temperature sensor for quick, accurate readings.
Raymarine’s RV-220 Bronze Through Hull Transducer system pack contains a pair
of RealVision 3D transducers with internal offset to accommodate hull deadrise
angles from 13° to 20°. This completely eliminates the need for fairing blocks.
The low-profile design slips effortlessly through the water without causing drag
or cavitation. The near-flush RV-220 system works great on trailered boats too.
The RV-220 system features rugged cast-bronze through hull bodies suitable
for fiberglass or wooden hulls. One transducer transmits and receives to port
and downwards, the other to starboard and downwards, ensuring a full 180° of
underwater coverage even on boats with deep keels or other underwater
protrusions. Each transducer features a 2-meter pigtail, joining y-cable and
8-meter extension cable, resulting in an overall cable length of 10 meters (33
feet.)
What's in the Box:
- RV-220P Bronze Port Transducer with 2-meter cable
- RV-220S Bronze Starboard Transducer with 2-meter cable
- RealVision 3D Transducer Y-Cable
- RealVision 3D 8-meter (26-feet) Transducer Extension Cable
- Anti-rotation bolt kit
- Installation instructions