The VETUS TANKV100 flexible tank is suitable to store grey
and black waste water and is odour tight. It can be
installed easily and quickly. It assumes the shape of the
space in which it is placed and can be positioned in places
that are normally difficult to reach. There is no need for
any additional installation parts. Fitting the outlet nipple
and connecting the hoses for inlet and outlet are the only
things to be done. When filled, the height is approx. 30 cm.
We not only weld the seams, but in addition we also weld an extra strip. This makes the VETUS flexible tank resistant against much higher pressures, especially if the contents are moving when the boat is rolling or pitching.
Construction – see drawing for details:
We not only weld the seams, but in addition we also weld an extra strip. This makes the VETUS flexible tank resistant against much higher pressures, especially if the contents are moving when the boat is rolling or pitching.
Construction – see drawing for details:
- 1. Two right angle nipples Ų 38 mm (supplied with the tank)
- 2. Right angle breather nipple Ų 16 mm, already fitted.
- 3. Breather nipple Ų 16 mm.
- 4. Breather bend for anti-siphoning device. When discharge of the tank through a deck plate is required, a Ų 38 mm tank connector is available as an option.
WARNING:
This product can expose you to chemicals including Di-n-hexyl Phthalate (DnHP)
which is known to the State of California to cause reproductive harm, and
Vinyl Chloride which is known to the State of California to cause cancer. For
more information go to 
