TRC Sanitation Hose Odor Shield, 1 1/2", 50'
Sanitation hose must handle sewage from the toilet to holding tank; pump out
and vent deck fittings and discharge thru hull fitting (where legal). It?
failure or odor permeation is very unpleasant, so choose and install your hose
carefully. It should be labeled "Sanitation"; and be made of smooth (inside and
out), heavy wall, flexible, and odor resistant construction and formulation. Our
rubber and vinyl sanitation hoses are the best available, but certain common
sense limitations apply to each for odor free performance. Good installations
are short and self-draining (no kinks, loops or dips), with tight connections.
NEW Extra
odor-resistant hose for all head and holding tank connections. This smooth light
grey hose a special anti-bacterial thermoplastic formulation that greatly
exceeds the odor resistance of our popular 148 series. The hard PVC helix gives
the same good flexibility and bend radius. No cuffs required. Not for potable
water applications, or for exposure to alcohol, petrochemicals or solvents. Self
draining installations are recommended for longest odor free service. Max.
operating temps: +10° to +140° F (-12° to +60° C). Max. working pressure 70 PSI
(0.48Mpa).
3 YEAR WARRANTY
1" & 1-1/2"
25mm & 38mm |
Very Light Grey |
50' (15m) Coil , 12.5' (3.8) Length,
Boxed on request up to 1.5" (38mm) |
|
WARNING:
This product can expose you to chemicals including Di-n-hexyl Phthalate (DnHP)
which is known to the State of California to cause reproductive harm, and
Vinyl Chloride which is known to the State of California to cause cancer. For
more information go to 
