Raymarine Type 3 Hydraulic Linear Drive 24V M81203
Raymarine Hydraulic Linear Drives
|
Designed for larger mechanically steered vessels over
20,000kg, our hydraulic linear drives are self-contained hydraulic steering
systems consisting of a reversing pump, reservoir and hydraulic ram.
A hydraulic linear drive unit connects to the rudder stock via an
independent tiller arm. Accessory fittings from your steering system
manufacturer may be required. Must be able to back drive steering system for
the rudder. |
| |
Hydraulic Linear Drives |
| |
|
|
|
Drive Type |
Type 2
12V: E12207
24V: E12208 |
Type 3
12V: M81202
24V: M81203 |
|
Maximum boat displacement |
22,000 kg |
35,000 kg |
|
Peak thrust |
585 kg |
1,200 kg |
|
Maximum stroke |
254 mm |
300 mm |
|
Hard-over to hard-over times |
10 seconds |
10 seconds |
|
Maximum rudder torque |
1,270 Nm |
3,200 Nm |
|
Corepack used |
ACU-400 |
ACU-400 |
Notes:
- A hydraulic linear drive unit connects to the rudder stock via an
independent tiller arm. Accessory fittings from your steering system
manufacturer may be required.
- An authorised Raymarine dealer is best suited for installing a linear
drive system.
- Must be able to back drive steering system for the rudder
|
Hydraulic Linear Drive (E12207, E12208, M81202, M81203)
Installation instructions 81177-5-EN.pdf
|
WARNING:
This product can expose you to chemicals including Di-n-hexyl Phthalate (DnHP)
which is known to the State of California to cause reproductive harm, and
Vinyl Chloride which is known to the State of California to cause cancer. For
more information go to 
