Steer By Wire for Yanmar VC10/8LV
The NavPilot 711C/OB-YAN is a complete NavPilot 711C/OB system with all of
the necessary components, cables and gateways to connect to a Yanmar VC10/8LV
system (not included).
Powerful new tools enhance safety and comfort
The optional SAFE HELM and POWER ASSIST features provide a unique interface
to the vessel's hydraulic hand steering system, providing unrivaled comfort and
control of steering directly from any manual helm on the vessel. These two modes
greatly reduce steering effort and enhance the safety of your autopilot. The
POWER ASSIST mode incorporates the SAFE HELM concept and provides speed-based,
power assisted steering, which greatly reduces manual helm effort in maneuvering
situations. POWER ASSIST is a unique helm-activated assisted steering feature
that can augment or replace separate electric and power-robbing, engine-driven
power steering systems on many vessels. POWER ASSIST reduces steering system
complexity and costs while increasing economy.
SAFE HELM and POWER ASSIST modes will
require the optional FPS8 Power Steering Module and an appropriate HRP Pumpset.
Integrate your helm with NavPilot's FishHunter mode
FishHunter mode is a unique feature of FURUNO’s NavPilot series. Find a
fish target with your FURUNO sonar/sounder or bird target with your FURUNO
radar and feed it to the NavPilot The NavPilot will activate the FishHunter
mode to perform square, zigzag, circle, orbit, spiral or figure-eight
maneuvers around the specified target at a user selected distance. This
feature can also be used for Man Overboard (MOB).
*RRU (Rudder Reference Unit)
required to enable Fish Hunter mode on NavPiot 711C/OB models
Beautiful & bright color LCD display
The new NavPilot 711C features a color day/night graphic display, offering
much better sunlight viewability during the day while not affecting your night
vision when the sun goes down.
Furuno Fantum Feedback
With Fantum Feedback, NAVpilot outboard/sterndrive installations no longer
require use of a physical rudder feedback unit. NAVpilot software clears the
path to a simplified installation, while also delivering enhanced steering
control.
Sabiki Mode for NavPilot 711C
With the brand new SABIKI mode, your NAVpilot 711C has just become even more
capable than before. SABIKI mode lets the autopilot control while you are
drifting astern so you can focus on fishing instead of steering. Moving astern
at a slow pace, the SABIKI mode is uniquely tailored for sabiki fishing, jigging
and bottom fishing. Sabiki fishing requires a bit of technique, and no matter if
you just started or have considerable experience, the SABIKI mode will help you
catch the bait fish needed for the big catch. And the best thing, there is no
need to install additional hardware or sensors. Just perform the automated
software upgrade, and the SABIKI mode will be added to your NAVpilot 711C.
SABIKI mode is only available on vessels with outboard engines.
In the box
NAVPILOT 711C/OB
Self-Learning, Adaptive Autopilot - Single-Din Size Color Display for
Outboards
IF-NMEA2K2
Interface Converter NMEA2000-NMEA0183
AIR-052-531
NMEA2000 T-Connector, Female/Female/Male
000-193-626-10
CABLE ASSY YANMAR VC10
DOC-711-YAN
NAVPILOT 711C/OB-YAN DOCUMENT
WARNING:
This product can expose you to chemicals including Di-n-hexyl Phthalate (DnHP)
which is known to the State of California to cause reproductive harm, and
Vinyl Chloride which is known to the State of California to cause cancer. For
more information go to 
