Victron BlueSmart IP67 Battery Charger - 12 VDC - 7AMP
BlueSmart IP67 Charger - 12 VDC - 7AMP
Features:
- Bluetooth Smart enabled The Blue Smart IP67 Charger is the wireless solution
to monitor voltage and current, to change settings and to update the charger
when new features become available. With Bluetooth, the functionality of the
IP67 charger is enhanced and is similar to that of our IP22 and IP65 chargers.
- Completely encapsulated: waterproof, shockproof and ignition protected
Water, oil or dirt will not damage the Blue Smart IP67 Charger. The casing is
made of cast aluminium and the electronics are moulded in resin.
- The highest efficiency ever! Setting a new industry standard: with 92%
efficiency or better, these chargers waste three to four times less heat. And
once the battery is fully charged, power consumption reduces to less than a
Watt, some five to ten times better than the industry standard.
- Adaptive 5-stage charge algorithm: bulk – absorption – recondition – float –
storage The Blue Smart Charger features a microprocessor controlled ‘adaptive’
battery management. The ‘adaptive’ feature will automatically optimize the
charging process relative to the way the battery is being used.
- Storage Mode: Less maintenance and aging when the battery is not in use The
storage mode kicks in whenever the battery has not been subjected to discharge
during 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell
(13,2 V for a 12 V battery) to minimize gassing and corrosion of the positive
plates. Once a week the voltage is raised back to the absorption level to
‘equalize’ the battery. This feature prevents stratification of the electrolyte
and sulphation, a major cause of early battery failure.
- Also charges Li-ion batteries and LiFePO4 batteries are charged with a
simple bulk – absorption – float algorithm.
- Protected against overheating Can be used in a hot environment such as a
machine room. Output current will reduce as temperature increases up to 60°C,
but the charger will not fail.
- Two LEDs for status indication Yellow LED: bulk charge (blinking fast),
absorption (blinking slow), float (solid), storage (off) Green LED: power on
Quick Guide
Datesheet
Manuals
Quick Installation Guide
Technical Information
|
WARNING:
This product can expose you to chemicals including Di-n-hexyl Phthalate (DnHP)
which is known to the State of California to cause reproductive harm, and
Vinyl Chloride which is known to the State of California to cause cancer. For
more information go to 
