Victron at (207) 354-0493;  Samlex at (800) 561 5885;  Xantrex at (408) 987 6030;   Magnum at (425) 353-8833; 

Mastervolt at  (800) 307-6702;  Promariner at (80) 824-0524;  Newmar at (714) 751-0488

Marine Battery Charger

Xantrex battery chargers are micro-processor controlled for fast, accurate charging of vehicle or boat batteries in deep cycle or maintenance applications. Xantrex battery chargers are compact, light weight and easy to install. These chargers feature multi-stage, power factor corrected charging meaning that they require less AC input power than traditional chargers to operate at its peak efficiency. This results in more AC power available for connected AC loads on vessel or vehicle.

Truecharge2  Xantrex TRUECharge™2 Battery Chargers lead the industry with a small footprint and ultra-compact design. Designed for marine and commercial applications worldwide, the new TRUECharge2 charger is the latest addition to the TRUECharge2 series. 
 

Newmar Battery Charger

Phase Three Series Battery Chargers: 12V

Input: 115/230 VAC
Output: 7 – 80 Amps

“Smart” battery charging technology for 12 volt systems aboard marine applications including workboats, military vessels, commercial vessels, and recreational craft. These chargers interact with batteries providing the optimum three stage charge process for fast recovery and conditioning, maximizing performance and extending battery life.

Phase Three Series Battery Chargers: 24 & 32V

Input: 115/230 VAC
Output: 8 – 95 Amps

“Smart” battery charging technology for 24 and 32 volt systems aboard marine applications including workboats, military vessels, commercial vessels, and recreational craft. These chargers interact with batteries providing the optimum three stage charge process for fast recovery and conditioning, maximizing performance and extending battery life.

Phase Three Modular & Programmable Series Battery Chargers: 24V

Input: 115/230 VAC
Output: 100 – 150 Amps

The PTMP represents a new level of functionality, reliability, and serviceability in very smart battery charging for critical 24 volt systems aboard work boats, military, commercial, and recreational craft. A menu of pre-programmed battery type charge profiles as well as custom settings option allow user to select or program optimal three step charging voltages and operating parameters. The chargers interact with batteries providing the ideal profile for replenishment and conditioning, resulting in maximum performance and extending service life.

Phase Three Modular Series Battery Charger: 24V
 

Input: 115/230 VAC
Output: 67 Amps

The PTM charger provides a significant improvement in system reliability, for critical marine applications, by utilizing multiple independent charger modules that plug into the unit, and should a fault occur in one module, the system continues to operate, thus is considered “fault tolerant”.

Phase Three Charger Monitor/Control Unit

Designed for installation in conjunction with most models of PT Battery Chargers, this unit provides additional functionality of monitoring, control, and alarms. It contains a Digital DC volt meter with 3 battery bank sense selector, a dial that adjusts the PT charger float voltage, and AC Master circuit breaker for control and protection of charger input power.

ABC Series Battery Charger: 12V
 

Input: 115/230 VAC
Output: 6 Amps

The ABC Series chargers utilize time tested SCR charging circuitry, individually sensing and regulating each of 2 isolated battery banks, allowing the user to leave the charger operating indefinitely, even under no-load conditions without fear of overcharging. These chargers are ideal for vessels or vehicles which have an intermittent demand for battery power.

ProNauticP Dry Mount Marine Battery Chargers

Frequently Asked Questions - Promariner