Map the seafloor of your fishing area in just a few
passes.
The DFF3D is a MultiBeam sonar. It allows you to use features such as Down
Sounder, Port and Starboard Sounder, Real time wide angle A-Scope (Section),
Fish Target History (Water Column) and Side Scan Sonar. The DFF3D can generate
up to 50 depth points per second. To put this into perspective, 300 football
fields can be covered in less than 20 minutes with the DFF3D!
TZ Professional (with the optional PBG and DFF3D
modules) can be connected to the new Furuno DFF3D Multi Beam sonar. Creating
your bathymetric (PBG) map becomes as fast as ever with TZ Professional.
Multiple beams are constantly sent out by the sonar returning quality
information for each depth point.
Master DFF3D data thanks to TZ Professional v3
The Section displays real-time conditions under the boat in a wide 120 degree
area port to starboard. This mode allows you to see exactly where fish are
detected and helps visualize the shape of the seafloor under your boat.
The Multi-Sounder operates like a traditional Sounder (scrolling from left to
right), but instead of having only one beam (under your boat), two additional
beams (port and starboard) are displayed on the screen. Because the
Multi-Sounder keeps a history of the previous echoes, it is easy to locate fish
at a glance.
The Water Column provides an easy and intuitive time-based image of the
seafloor, along with fish target icons. This mode displays a historical view of
the section under your boat. Note that even if the boat does not move, the
picture will continue to scroll to show the evolution of the water column (fish
that may move) under your boat.
The Side Scan mode displays the
DFF3D data in a port and starboard view that scrolls vertically from the top
down. It’s best used in shallow water to identify bottom structure.